2007637-5 TE Connectivity, 2007637-5 Datasheet - Page 9

• Manufacturer Part Number: 2007637-5
• Description: CAGE, STACKED, 2X2, SFP+, LIGHT
• Manufacturer: TE Connectivity

Specifications of 2007637-5

• Connector Type: Cage
• Contact Termination: Press Fit
• Connector Mounting: PCB
• Contact Plating: Gold
• Contact Material: Copper Alloy
• Connector Mounting Orientation: PCB
• Rohs Compliant: Yes
• No. Of Contacts: 4
• Svhc: No SVHC (15-Dec-2010)
• Product Type: Cage
• Termination Type: Press-Fit
• Configuration: 2 x 2
• Pcb Mount: Single Sided
• Termination Post Length (mm [in]): 3.00 [0.118]
• Contact Plating, Mating Area, Material: Gold or Gold Flash over Palladium Nickel
• Contact Base Material: Copper Alloy
• Cage Type: Stacked
• Housing Color: Black
• Ul Flammability Rating: UL 94V-0
• Housing Material: Liquid Crystal Polymer (LCP)
• Cage Material: Nickel Silver
• Emi Containment: External Springs
• Lightpipe: With
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Application: SFP+
• Lightpipe Configuration: Four Per Column
• Packaging Method: Tray

5.1. Seating Tool Kits
The seating tool kits (each consists of a seating tool and wall support) are used to seat the connector and cage
assembly onto the pc board. The seating tool and wall support are also available separately.
5.2. Extraction Tool
The extraction tool is used to remove the connector and cage assembly from the pc board by pushing the pc
board off of the connector and cage assembly. The part should not be reused.
5.3. Application Tool
Power for the seating tools and extraction tools must be provided by an application tool (with a ram) capable of
supplying a downward force of 44.5 N [10 lbs] per contact. For available application tools, call Product
Information at the number at the bottom of page 1.
5.4. PC Board Support Fixture
A pc board support must be used with the seating tool and the extraction tool. The support fixture provides
proper support for the pc board and protects the pc board and the connector and cage assembly from damage.
The support fixture must be customer designed. It is recommended that the support fixture be at least 25.4 mm
longer and wider than the pc board and have flat surfaces with holes or a channel large enough and deep
enough to receive any protruding components of the connector and cage assembly.
Rev B
Typical Seating
Tool Kit
(Refer to Table)
Standard
Standard
TYPE
CONNECTOR AND CAGE ASSEMBLY
CONFIGURATION
2¢1
2¢2
2¢4
2¢6
Figure 7
SEATING TOOL KIT
SEATING TOOL KIT
(408- - 10261)
2018280--1
2018280--2
2018280--3
2018280--4
Typical Extraction Tool
(Refer to Table)
EXTRACTION TOOL
EXTRACTION TOOL
(408- - 10259)
2063048--1
2063048--2
2063048--3
2063048--4
114- 13219
9 of 10