6-1445297-3 TE Connectivity, 6-1445297-3 Datasheet - Page 3

• Manufacturer Part Number: 6-1445297-3
• Description: REC.R/A SMT,30 POS,LF
• Manufacturer: TE Connectivity

Specifications of 6-1445297-3

• Product Type: Connector
• Connector Type: Connector Assembly
• Pcb Mounting Orientation: Right Angle
• Pcb Mount Style: Surface Mount
• Pcb Mount Retention: With
• Dielectric Withstanding Voltage (v): 250
• Insulation Resistance (m?): 500
• Voltage (vac): 30
• Current Rating (a): 1, 0.75
• Solder Tail Contact Plating: Tin over Nickel
• Number Of Positions: 30
• Pcb Mount Retention Type: Boardlock(s)
• Centerline (mm [in]): 0.80 [0.031]
• Contact Type: Socket
• Contact Base Material: Copper Alloy
• Contact Plating, Mating Area, Material: Gold (30)
• Connector Style: Receptacle
• Housing Material: Thermoplastic - GF
• Housing Color: Beige
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Reflow solder capable to 245°C, Reflow solder capable to 260°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Approved Standards: UL E28476
• Applies To: Printed Circuit Board
• Temperature Range (°c): -55 – +85

Rev B
Mechanical shock, specified pulse.
Durability.
Mating force.
Unmating force.
Plug contact retention.
Thermal shock.
Humidity-temperature cycling.
Temperature life.
Mixed flowing gas.
NOTE
Test Description
Shall meet visual requirements, show no physical damage, and meet requirements of additional
tests as specified in the Product Qualification and Requalification Test Sequence shown in Figure
2.
No discontinuities of 1 microsecond
or longer duration.
See Note.
See Note.
24.9 N [5.6 lbf] maximum for 4
position specimens.
101.4 N [22.8 lbf] maximum for 40
position specimens.
See Figure 5.
1.3 N [.3 lbf] minimum for 4 position
specimens.
13.3 N [3 lbf] minimum for 40
position specimens.
See Figure 5.
Contacts shall not dislodge.
See Note.
See Note.
See Note.
See Note.
ENVIRONMENTAL
Figure 1 (end)
Requirement
EIA-364-27, Method H.
Subject mated specimens to 30 G's
half-sine shock pulses of 11
milliseconds duration. 3 shocks in
each direction applied along 3
mutually perpendicular planes, 18
total shocks.
See Figure 4.
EIA-364-9.
Manually mate and unmate
specimens for 25 cycles at a
maximum rate of 500 cycles per
hour.
EIA-364-13.
Measure force necessary to mate
specimens at a maximum rate of
12.7 mm [.5 in] per minute.
EIA-364-13.
Measure force necessary to
unmate specimens at a maximum
rate of 12.7 mm [.5 in] per minute.
Apply an axial load of 9.3 N [2.1 lbf]
at a rate of 12.7 mm [.5 in] per
minute.
EIA-364-32.
Subject mated specimens to 5
cycles between -55 and 85° C.
EIA-364-31.
Subject mated specimens to 10, 24
hour cycles between 25 and 65° C
at 95% RH.
EIA-364-17.
Subject mated specimens to 85° C
for 500 hours.
EIA-364-65.
Subject mated specimens to
environmental Class IIA for 14
days.
Procedure
108-1955
3 of 7