6-1445297-3 TE Connectivity, 6-1445297-3 Datasheet - Page 2

• Manufacturer Part Number: 6-1445297-3
• Description: REC.R/A SMT,30 POS,LF
• Manufacturer: TE Connectivity

Specifications of 6-1445297-3

• Product Type: Connector
• Connector Type: Connector Assembly
• Pcb Mounting Orientation: Right Angle
• Pcb Mount Style: Surface Mount
• Pcb Mount Retention: With
• Dielectric Withstanding Voltage (v): 250
• Insulation Resistance (m?): 500
• Voltage (vac): 30
• Current Rating (a): 1, 0.75
• Solder Tail Contact Plating: Tin over Nickel
• Number Of Positions: 30
• Pcb Mount Retention Type: Boardlock(s)
• Centerline (mm [in]): 0.80 [0.031]
• Contact Type: Socket
• Contact Base Material: Copper Alloy
• Contact Plating, Mating Area, Material: Gold (30)
• Connector Style: Receptacle
• Housing Material: Thermoplastic - GF
• Housing Color: Beige
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Reflow solder capable to 245°C, Reflow solder capable to 260°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Approved Standards: UL E28476
• Applies To: Printed Circuit Board
• Temperature Range (°c): -55 – +85

3.3.
3.4.
3.5.
Rev B
Initial examination of product.
Final examination of product.
Low level contact resistance.
Insulation resistance.
Withstanding voltage.
Solderability.
Vibration, random.
Ratings
!
!
!
Performance and Test Description
Product is designed to meet the electrical, mechanical and environmental performance requirements
specified in Figure 1. Unless otherwise specified, all tests shall be performed at ambient environmental
conditions per EIA-364.
Test Requirements and Procedures Summary
Test Description
Voltage: 30 volts AC
Current: Signal application only, 1 ampere per contact terminated with 28 AWG wire, .75 ampere
per contact terminated with 30 AWG wire
Temperature: -55 to 85° C unless limited by the tem perature rating of the wire being used
Meets requirements of product
drawing.
Meets visual requirements.
25 milliohms maximum.
500 megohms minimum.
1 minute hold with no breakdown or
flashover.
Solderable area shall have a
minimum of 95% solder coverage.
No discontinuities of 1 microsecond
or longer duration.
See Note.
Figure 1 (continued)
MECHANICAL
ELECTRICAL
Requirement
EIA-364-18.
Visual and dimensional inspection
per product drawing.
EIA-364-18.
Visual inspection.
EIA-364-23.
Subject specimens to 100
milliamperes maximum and 20
millivolts maximum open circuit
voltage.
See Figure 3.
EIA-364-21.
Test between adjacent contacts of
mated specimens.
EIA-364-20.
250 volts AC at sea level.
Test between adjacent contacts of
mated specimens.
EIA-364-52, Category 3.
Subject contacts to solderability.
EIA-364-28, Condition VII, Level D.
Subject mated specimens to 3.10
G's rms between 20-500 Hz. 15
minutes in each of 3 mutually
perpendicular planes.
See Figure 4.
Procedure
108-1955
2 of 7