4-647010-5 TE Connectivity, 4-647010-5 Datasheet - Page 3

• Manufacturer Part Number: 4-647010-5
• Description: 15P MTA100 PSTD CONN ASSY LF
• Manufacturer: TE Connectivity

Specifications of 4-647010-5

• Connector Type: Connector Assembly
• Connector Design: Closed End
• Product Line: MTA-100
• Termination Method To Wire/cable: IDC Standard
• Wire Size (mm² [awg]): 0.12-0.15² [26]
• Mating Connector Lock: Without
• Four Points Of Contact: Without
• Shrouded: No
• Mounting Ears: Without
• Panel Mount Retention: Without
• Voltage Rating (vac): 250
• Solder Tail Contact Plating: Bright Tin
• Number Of Positions: 5
• Centerline (mm [in]): 2.54 [0.100]
• Narrow: No
• Post Number(s) Omitted: None
• Contact Type: Socket
• Contact Plating, Mating Area, Material: Gold (30) or (30) Total Gold Flash over Palladium Nickel
• Contact Base Material: Copper Alloy
• Connector Style: Receptacle
• Housing Color: Blue
• Mating Alignment: Without
• Ul Flammability Rating: UL 94V-2
• Housing Material: Nylon
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Wire/Cable
• Application Use: Wire-to-Wire

Termination tensile strength,
perpendicular.
Sinusoidal vibration.
Mechanical shock.
Durability.
Mating force.
Unmating force.
Thermal shock.
Rev D
Test Description
Wire Size Slot Tensile, Minimum
No discontinuities of 1 microsecond
or longer duration.
See Note.
No discontinuities of 1 microsecond
or longer duration.
See Note.
See Note.
8.9 N [2 lbf] maximum, averaged on
a per contact basis.
0.4 N [.1 lbf] minimum, averaged on
a per contact basis.
See Note.
AWG
28
26
24
22
Figure 1 (continued)
ENVIRONMENTAL
Requirement
13.3
4.4
4.4
4.4
N
[lbf]
1
1
1
3
TE Spec 109-16.
Determine slot tensile at a
maximum rate of 25.4 mm [1 in] per
minute.
See Figure 5.
TE Spec 109-21-1.
Subject mated samples to 10-55-10
Hz traversed in 1 minute at 1.5 mm
[0.06 inch] total excursion. Two
hours in each of 3 mutually
perpendicular planes.
See Figure 6.
TE Spec 109-26-1.
Subject mated samples to 50 G's
half-sine shock pulses of 11
milliseconds duration. 3 shocks in
each direction applied along 3
mutually perpendicular planes, 18
total shocks.
See Figure 6.
TE Spec 109-27.
Manually mate and unmate
samples with lock temporarily
disengaged with standard MTA-100
connector for 25 cycles.
TE Spec 109-42, Condition A.
Measure force necessary to mate
samples with lock temporarily
disengaged to standard MTA-100
connector from point of initial
contact to a depth of 5 mm [.200 in]
at maximum rate of 12.7 mm [.5 in]
per minute.
TE Spec 109-42, Condition A.
Measure force necessary to unmate
samples with lock temporarily
disengaged from standard MTA-100
connector at a maximum rate of
12.7 mm [.5 in] per minute.
TE Spec 109-22.
Subject mated samples to 25 cycles
between -55 and 105° C.
Procedure
108-1050-1
3 of 11