ISL1208IU8Z Intersil, ISL1208IU8Z Datasheet - Page 3

• Manufacturer Part Number: ISL1208IU8Z
• Description: IC RTC LP BATT BACKED SRAM 8MSOP
• Manufacturer: Intersil
• Type: Clock/Calendar/NVSRAMr

Specifications of ISL1208IU8Z

• Memory Size: 2B
• Time Format: HH:MM:SS (12/24 hr)
• Date Format: YY-MM-DD-dd
• Interface: I²C, 2-Wire Serial
• Voltage - Supply: 2.7 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 8-MSOP, Micro8™, 8-uMAX, 8-uSOP,
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Pin Descriptions
NUMBER SYMBOL
PIN
1
2
3
4
5
6
7
8
IRQ/FOUT Interrupt Output/Frequency Output is a multi-functional pin that can be used as interrupt or frequency output pin. The function
VBAT
GND
VDD
SDA
SCL
X1
X2
The X1 pin is the input of an inverting amplifier and is intended to be connected to one pin of an external 32.768kHz quartz
crystal. X1 can also be driven directly from a 32.768kHz source.
The X2 pin is the output of an inverting amplifier and is intended to be connected to one pin of an external 32.768kHz quartz
crystal.
This input provides a backup supply voltage to the device. V
fails. This pin should be tied to ground if not used.
Ground
Serial Data (SDA) is a bidirectional pin used to transfer serial data into and out of the device. It has an open drain output and
may be wire OR’ed with other open drain or open collector outputs.
The Serial Clock (SCL) input is used to clock all serial data into and out of the device.
is set via the configuration register.
Power supply
3
ISL1208
DESCRIPTION
BAT
supplies power to the device in the event that the V
September 12, 2008
DD
FN8085.8
supply