H7CX-A11-N AC100-240 Omron, H7CX-A11-N AC100-240 Datasheet - Page 32

• Manufacturer Part Number: H7CX-A11-N AC100-240
• Description: COUNTER DGTL SPDT 100-240VAC
• Manufacturer: Omron

Specifications of H7CX-A11-N AC100-240

• Count Rate: 30Hz or 5kHz Selectable
• Number Of Digits/alpha: 6
• Input Type: Voltage, Switch Closure, Transistor Switch
• Output Type: Switch Closure
• Voltage - Supply: 100 V ~ 240 VAC
• Display Type: LCD Backlit
• No. Of Digits / Alpha: 4
• Digit Height: 10mm
• Power Consumption: 9.4VA
• Counting Speed: 5kHz
• Operating Temperature Range: -10°C To +55°C
• Character Size: 9mm
• Supply Voltage Min: 100VAC
• Panel Cutout Width: 45mm
• Meter Function: Counter
• Rohs Compliant: Yes
• Connector Type: 11-Pin Socket
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: H7CXA11NAC100240; Z3041

H7CX-A@-N
Tachometer
ON Count Alarm Set Values for Outputs 1 and 2 (OUT1
and OUT2) (on1a and on2a)
Set the ON count alarm values for the outputs 1 and 2.
The limit can be set to between 0
1000 (0 times) and 9999
1000
(9,999,000 times). Only the underlined values are set. The alarm will
be disabled if 0 is set.
If the total ON count of instantaneous output 1 or 2 exceeds the alarm
set value, e3 will be displayed on the Timer to indicate that the output
ON count alarm value was exceeded. Refer to Self-diagnostic
Function on page page 36 for information on the e3 display.
ON Count Monitor Values for Outputs 1 and 2 (OUT1 and
OUT2) (on1c and on2c)
The monitor value for output 1 or 2 is only displayed. It cannot be set.
The output ON count will be 1,000 times the displayed value.
32