5962-9098501MRA E2V, 5962-9098501MRA Datasheet - Page 4

• Manufacturer Part Number: 5962-9098501MRA
• Manufacturer: E2V

Specifications of 5962-9098501MRA

• Lead Free Status / RoHS Status: Supplier Unconfirmed

DSCC FORM 2234
APR 97
of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
Boulevard, Arlington, VA 22201-3834.)
P.O. Box C700, West Conshohocken, PA, 19428-2959).
of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a
specific exemption has been obtained.
MIL-PRF-38535 and as specified herein or as modified in the device manufacturer's Quality Management (QM) plan. The
modification in the QM plan shall not affect the form, fit, or function as described herein. The individual item requirements for
device class M shall be in accordance with MIL-PRF-38535, appendix A for non-JAN class level B devices and as specified
herein.
in MIL-PRF-38535 and herein for device classes B, S, Q, and V or MIL-PRF-38535, appendix A and herein for device class M.
2. APPLICABLE DOCUMENTS
2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part
DEPARTMENT OF DEFENSE SPECIFICATION
DEPARTMENT OF DEFENSE STANDARDS
DEPARTMENT OF DEFENSE HANDBOOKS
(Copies of these documents are available online at http://assist.daps.dla.mil/quicksearch/ or http://assist.daps.dla.mil or from
2.2 Non-Government publications. The following document(s) form a part of this document to the extent specified herein.
ELECTRONIC INDUSTRIES ALLIANCE (EIA)
(Copies of these documents are available online at http://www.jedec.org or from Electronic Industries Alliance, 2500 Wilson
(Copies of these documents are available online at
2.3 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text
3. REQUIREMENTS
3.1 Item requirements. The individual item requirements for device classes B, S, Q, and V shall be in accordance with
3.2 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as specified
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for.
MIL-STD-883
MIL-STD-1835
MIL-HDBK-103
MIL-HDBK-780
EIA/JEDEC Standard No. 78
JEDEC Standard No. 20
ASTM F1192
DEFENSE SUPPLY CENTER COLUMBUS
MICROCIRCUIT DRAWING
COLUMBUS, OHIO 43218-3990
STANDARD
-
-
-
-
Test Method Standard Microcircuits.
Interface Standard Electronic Component Case Outlines.
List of Standard Microcircuit Drawings.
Standard Microcircuit Drawings.
- Standard Guide for the Measurement of Single Event Phenomena (SEP) Induced by Heavy Ion
Irradiation of semiconductor Devices.
-
Standard for Description of 54/74ACXXXX and 54/74ACTXXXX Advanced High-Speed
CMOS Devices.
-
IC Latch-up Test
http://www.astm.org
SIZE
A
or from ASTM International, 100 Barr Harbor Drive,
REVISION LEVEL
C
SHEET
5962-90985
4