ISP1505CBS,518 NXP Semiconductors, ISP1505CBS,518 Datasheet - Page 20

• Manufacturer Part Number: ISP1505CBS,518
• Description: RF Transceiver USB2.0 ULPI HOST/DEV
• Manufacturer: NXP Semiconductors

Specifications of ISP1505CBS,518

• Number Of Transceivers: 1
• Esd Protection: YeskV
• Operating Supply Voltage (typ): Not RequiredV
• Operating Temperature Classification: Industrial
• Operating Supply Voltage (max): Not RequiredV
• Operating Supply Voltage (min): Not RequiredV
• Mounting: Surface Mount
• Operating Temperature (max): 85C
• Operating Temperature (min): -40C
• Operating Supply Voltage: 1.65 V to 3.6 V
• Mounting Style: SMD/SMT
• Package / Case: HVQFN-24
• Lead Free Status / RoHS Status: Compliant
• Other names: 935278317518 ISP1505CBS-T

NXP Semiconductors
ISP1505A_ISP1505C_3
Product data sheet
If a crystal is attached or a clock is driven into the XTAL1 pin, the ISP1505 will drive a
60 MHz clock out from the CLOCK pin when DIR deasserts. This is shown as CLOCK in
Figure
The recommended power-up sequence for the link is as follows:
The ULPI interface is ready for use.
1. The link waits for 1 ms, ignoring all the ULPI pin status.
2. The link may start to detect DIR status level. If DIR is detected as LOW for three clock
cycles, the link may send a RESET command.
4.
Rev. 03 — 26 August 2008
ULPI HS USB host and peripheral transceiver
ISP1505A; ISP1505C
© NXP B.V. 2008. All rights reserved.
19 of 75