PIC16F1517-E/P Microchip Technology, PIC16F1517-E/P Datasheet - Page 146

• Manufacturer Part Number: PIC16F1517-E/P
• Description: 40-pin, 14KB Flash, 512B RAM, 10-bit ADC, 2xCCP, SPI, MI2C, EUSART, 2.3V-5.5V 40
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 16Fr

Specifications of PIC16F1517-E/P

• Processor Series: PIC16F151x
• Core: PIC
• Data Bus Width: 8 bit
• Program Memory Type: Flash
• Program Memory Size: 8 KB
• Data Ram Size: 512 B
• Interface Type: I2C, SPI, USART
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 36
• Number Of Timers: 3
• Operating Supply Voltage: 2.3 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: Through Hole
• Package / Case: PDIP-40
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 36
• Eeprom Size: -
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 2.3 V ~ 5.5 V
• Data Converters: A/D 28x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Lead Free Status / Rohs Status: Details

PIC16(L)F1516/7/8/9
16.2.6
This is an example procedure for using the ADC to
perform an Analog-to-Digital conversion:
1.
2.
3.
4.
5.
6.
7.
8.
DS41452B-page 146
Note 1: The global interrupt can be disabled if the
Configure Port:
• Disable pin output driver (Refer to the TRIS
• Configure pin as analog (Refer to the ANSEL
Configure the ADC module:
• Select ADC conversion clock
• Configure voltage reference
• Select ADC input channel
• Turn on ADC module
Configure ADC interrupt (optional):
• Clear ADC interrupt flag
• Enable ADC interrupt
• Enable peripheral interrupt
• Enable global interrupt
Wait the required acquisition time
Start conversion by setting the GO/DONE bit.
Wait for ADC conversion to complete by one of
the following:
• Polling the GO/DONE bit
• Waiting for the ADC interrupt (interrupts
Read ADC Result.
Clear the ADC interrupt flag (required if interrupt
is enabled).
register)
register)
enabled)
2: Refer to
A/D CONVERSION PROCEDURE
user is attempting to wake-up from Sleep
and resume in-line code execution.
Requirements”
Section 16.4 “A/D Acquisition
.
(1)
(2)
.
Preliminary
EXAMPLE 16-1:
;This code block configures the ADC
;for polling, Vdd and Vss references, Frc
;clock and AN0 input.
;
;Conversion start & polling for completion
; are included.
;
BANKSEL
MOVLW
MOVWF
BANKSEL
BSF
BANKSEL
BSF
BANKSEL
MOVLW
MOVWF
CALL
BSF
BTFSC
GOTO
BANKSEL
MOVF
MOVWF
BANKSEL
MOVF
MOVWF
ADCON1
B’11110000’ ;Right justify, Frc
ADCON1
TRISA
TRISA,0
ANSEL
ANSEL,0
ADCON0
B’00000001’ ;Select channel AN0
ADCON0
SampleTime
ADCON0,ADGO ;Start conversion
ADCON0,ADGO ;Is conversion done?
$-1
ADRESH
ADRESH,W
RESULTHI
ADRESL
ADRESL,W
RESULTLO
A/D CONVERSION
 2011 Microchip Technology Inc.
;
;clock
;Vdd and Vss Vref
;
;Set RA0 to input
;
;Set RA0 to analog
;
;Turn ADC On
;Acquisiton delay
;No, test again
;
;Read upper 2 bits
;store in GPR space
;
;Read lower 8 bits
;Store in GPR space