ADM7001XACT1XP Lantiq, ADM7001XACT1XP Datasheet - Page 48

• Manufacturer Part Number: ADM7001XACT1XP
• Manufacturer: Lantiq

Specifications of ADM7001XACT1XP

• Lead Free Status / RoHS Status: Supplier Unconfirmed

Table 20
Mode
Read only
Read virtual
Latch high,
self clearing
Latch low,
self clearing
Latch high,
mask clearing
Latch low,
mask clearing
Interrupt high,
self clearing
Interrupt low,
self clearing
Interrupt high,
mask clearing
Interrupt low,
mask clearing
Interrupt enable
register
latch_on_reset
Read/write
self clearing
Table 21
Clock Short Name
4.1
Data Sheet
Registers Access Types (cont’d)
Registers Clock Domains
Register Description
Symbol Description Hardware (HW)
ro
rv
lhsc
llsc
lhmk
llmk
ihsc
ilsc
ihmk
ilmk
ien
lor
rwsc
Register is set by HW (register between
input and output -> one cycle delay)
Physically, there is no new register, the
input of the signal is connected directly
to the address multiplexer.
Latch high signal at high level, clear on
read
Latch high signal at low-level, clear on
read
Latch high signal at high level, register
cleared with written mask
Latch high signal at low-level, register
cleared on read
Differentiate the input signal (low-
>high) register cleared on read
Differentiate the input signal (high-
>low) register cleared on read
Differentiate the input signal (high-
>low) register cleared with written mask
Differentiate the input signal (low-
>high) register cleared with written
mask
Enables the interrupt source for
interrupt generation
rw register, value is latched after first
clock cycle after reset
Register is used as input for the hw, the
register will be cleared due to a HW
mechanism.
Description
48
Description Software (SW)
SW can only read this register
SW can only read this register
SW can read the register
SW can read the register
SW can read the register, with write mask
the register can be cleared (1 clears)
SW can read the register, with write mask
the register can be cleared (1 clears)
SW can read the register
SW can read the register
SW can read the register, with write mask
the register can be cleared
SW can read the register, with write mask
the register can be cleared
SW can read and write this register
Register is read and writable by SW
Writing to the register generates a strobe
signal for the HW (1 pdi clock cycle)
Register is read and writable by SW.
Registers Description
Rev. 1.07, 2005-09-12
Data sheet
ADM7001