PZTA 92 E6433 Infineon Technologies, PZTA 92 E6433 Datasheet - Page 6

• Manufacturer Part Number: PZTA 92 E6433
• Description: TRANSISTOR PNP 300V SOT-223
• Manufacturer: Infineon Technologies

Specifications of PZTA 92 E6433

• Package / Case: SOT-223 (3 leads + Tab), SC-73, TO-261
• Transistor Type: PNP
• Current - Collector (ic) (max): 500mA
• Voltage - Collector Emitter Breakdown (max): 300V
• Vce Saturation (max) @ Ib, Ic: 500mV @ 2mA, 20mA
• Dc Current Gain (hfe) (min) @ Ic, Vce: 25 @ 30mA, 10V
• Power - Max: 1.5W
• Frequency - Transition: 100MHz
• Mounting Type: Surface Mount
• Configuration: Single Dual Collector
• Transistor Polarity: PNP
• Mounting Style: SMD/SMT
• Maximum Operating Frequency: 100 MHz
• Collector- Emitter Voltage Vceo Max: 300 V
• Continuous Collector Current: 0.5 A
• Power Dissipation: 1.5 W
• Maximum Operating Temperature: + 150 C
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Current - Collector Cutoff (max): -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant
• Other names: PZTA92E6433T; PZTA92E6433XT; SP000011009

Impressum
Published by Infineon Technologies AG,
St.-Martin-Strasse 53,
81669 München
© Infineon Technologies AG 2005.
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be
considered as a guarantee of characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of
non-infringement, regarding circuits, descriptions and charts stated herein.
Information
For further information on technology, delivery terms and conditions and prices
please contact your nearest Infineon Technologies Office (www.Infineon.com).
Warnings
Due to technical requirements components may contain dangerous substances.
For information on the types in question please contact your nearest Infineon
Technologies Office.
Infineon Technologies Components may only be used in life-support devices or
systems with the express written approval of Infineon Technologies, if a failure of
such components can reasonably be expected to cause the failure of that life-support
device or system, or to affect the safety or effectiveness of that device or system.
Life support devices or systems are intended to be implanted in the human body, or
to support and/or maintain and sustain and/or protect human life. If they fail, it is
reasonable to assume that the health of the user or other persons may be endangered.