C702 10M008 1214 Amphenol, C702 10M008 1214 Datasheet - Page 41
![no-image](/images/manufacturer_photos/0/0/49/amphenol_sml.jpg)
C702 10M008 1214
Manufacturer Part Number
C702 10M008 1214
Description
Manufacturer
Amphenol
Type
Smart Cardr
Datasheet
1.C702_10M008_1214.pdf
(60 pages)
Specifications of C702 10M008 1214
Ejector Type
Pushmatic
Gender
HDR
Mounting Style
Through Hole
Termination Method
Solder
Body Orientation
Right Angle
Contact Pitch (mm)
2.54mm
Number Of Contact Rows
2
Number Of Contacts
16POS
Operating Temp Range
-25C to 85C
Insertion Force
12
Product Height (mm)
6.4mm
Product Depth (mm)
50.1mm
Product Length (mm)
64.5mm
Contact Pitch
2.54mm
Lead Free Status / RoHS Status
Compliant
Smart Card Connectors
Hybrid Reader
Series C703A
Hybrid Reader
The manual Hybrid Reader accepts both ISO
7810 magstripe cards and ISO 7816 chip cards in
the same slot. Push-pull card handling allows
reading of the magnetic stripe on the way in or
out, and reading/writing of the chip card when the
card is fully inserted. Standard product features a
dual head contact set (ISO & AFNOR) and track 2,
1 + 2 or 2 + 3 reading options available for the
magnetic head. The head is suspended by a
unique gimballed (cardanian) system that assures
accurate data transfer. The reader features a
decoder circuit for each track and an 18 pin
interface conncector.
Usable Cards
Magstripe cards
ISO 7810, 7811, 7812; LOCO and HICO.
The magstripe will be read 100% during insertion
and extraction of the card.
Chipcards
ISO 7816. Contact positions ISO, AFNOR and ISO
& AFNOR can be read and written to.
Embossed cards acc. to ISO 7811, part 3 are
accepted.
done on a system board while data and clock
signal are available separately.
Card Detector 1 (CD1) detects the movement
over the maghead and is low active until 50 ms
after last clock signal of magtracks.
Card Detector 2 (CD2) detects card active posi-
tion.
Data and clock signal of magtracks as well as
CD1 and CD2 are TTL / CMOS compatible.
This hybrid reader is intended for integration into
electronic equipment and systems. When integra-
ted, the EMC requirements of the respective
equipment or system acc. to EMC guidelines
89 / 336 EWG shall be followed.
Assembly instructions:
The Smart Card Connector data con-
tacts are connected to a pin header.
F2F decoding of magstripe signal is
41