2N6508G ON Semiconductor, 2N6508G Datasheet - Page 7

• Manufacturer Part Number: 2N6508G
• Description: THYRISTOR SCR 25A 600V TO220AB
• Manufacturer: ON Semiconductor
• Type: SCRr

Specifications of 2N6508G

• Scr Type: Standard Recovery
• Voltage - Off State: 600V
• Voltage - Gate Trigger (vgt) (max): 1.5V
• Voltage - On State (vtm) (max): 1.8V
• Current - On State (it (av)) (max): 16A
• Current - On State (it (rms)) (max): 25A
• Current - Gate Trigger (igt) (max): 30mA
• Current - Hold (ih) (max): 40mA
• Current - Off State (max): 10µA
• Current - Non Rep. Surge 50, 60hz (itsm): 250A @ 60Hz
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Through Hole
• Package / Case: TO-220-3 (Straight Leads)
• Current - On State (it (rms) (max): 25A
• Repetitive Peak Off-state Volt: 600V
• Off-state Voltage: 600V
• Average On-state Current: 16A
• Hold Current: 40mA
• Gate Trigger Current (max): 30mA
• Gate Trigger Voltage (max): 1.5V
• Package Type: TO-220AB
• Peak Repeat Off Current: 10uA
• Peak Surge On-state Current (max): 250A
• On State Voltage(max): 1.8@50AV
• Mounting: Through Hole
• Pin Count: 3 +Tab
• Operating Temp Range: -40C to 125C
• Operating Temperature Classification: Automotive
• Current, Forward: 25 A
• Current, Surge: 250 A
• Primary Type: SCR
• Resistance, Thermal, Junction To Case: 1.5 °C/W
• Temperature, Junction, Maximum: +125 °C
• Temperature, Operating: -40 to +125 °C
• Voltage, Forward: 1.8 V
• Voltage, Reverse: 600 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 2N6508GOS

PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: [phone] or 800-344-3860 Toll Free USA/Canada
Fax: [phone] or 800-344-3867 Toll Free USA/Canada
Email: [e-mail]
ON Semiconductor and
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
H
Q
Z
L
V
G
1 2 3
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
B
N
4
D
A
K
F
T
U
N. American Technical Support: 800-282-9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: [phone]
Japan Customer Focus Center
Phone: [phone]
PACKAGE DIMENSIONS
http://onsemi.com
2N6504 Series
CASE 221A-07
TO-220AB
ISSUE AA
C
-T-
7
J
R
S
SEATING
PLANE
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION Z DEFINES A ZONE WHERE ALL
Y14.5M, 1982.
BODY AND LEAD IRREGULARITIES ARE
ALLOWED.
STYLE 3:
DIM
A
B
C
D
F
G
H
K
L
N
Q
R
S
T
U
V
Z
J
PIN 1. CATHODE
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
2. ANODE
3. GATE
4. ANODE
0.570
0.380
0.160
0.025
0.142
0.095
0.110
0.014
0.500
0.045
0.190
0.100
0.080
0.045
0.235
0.000
0.045
MIN
---
INCHES
0.620
0.405
0.190
0.035
0.147
0.105
0.155
0.022
0.562
0.060
0.210
0.120
0.055
0.255
0.050
0.080
0.110
MAX
---
14.48
12.70
MILLIMETERS
MIN
9.66
4.07
0.64
3.61
2.42
2.80
0.36
1.15
4.83
2.54
2.04
1.15
5.97
0.00
1.15
---
15.75
10.28
14.27
MAX
4.82
0.88
3.73
2.66
3.93
0.55
1.52
5.33
3.04
2.79
1.39
6.47
1.27
2.04
---
2N6504/D