BFP 405 E6433 Infineon Technologies, BFP 405 E6433 Datasheet - Page 9

• Manufacturer Part Number: BFP 405 E6433
• Description: TRANSISTOR RF NPN 4.5V SOT-343
• Manufacturer: Infineon Technologies

Specifications of BFP 405 E6433

• Package / Case: SC-70-4, SC-82-4, SOT-323-4, SOT-343
• Transistor Type: NPN
• Voltage - Collector Emitter Breakdown (max): 5V
• Frequency - Transition: 25GHz
• Noise Figure (db Typ @ F): 1.25dB @ 1.8GHz
• Gain: 23dB
• Power - Max: 75mW
• Dc Current Gain (hfe) (min) @ Ic, Vce: 60 @ 5mA, 4V
• Current - Collector (ic) (max): 25mA
• Mounting Type: Surface Mount
• Configuration: Single Dual Emitter
• Transistor Polarity: NPN
• Mounting Style: SMD/SMT
• Maximum Operating Frequency: 25 GHz
• Collector- Emitter Voltage Vceo Max: 4.5 V
• Continuous Collector Current: 0.012 A
• Power Dissipation: 55 mW
• Maximum Operating Temperature: + 150 C
• Minimum Operating Temperature: - 65 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: BFP405E6433XT; SP000011033

BFP405
Edition 2009-11-05
Published by Infineon Technologies AG,
85579 Neubiberg, Germany
© Infineon Technologies AG 2009.
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be
considered as a guarantee of characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of
non-infringement, regarding cicuits, descriptions and charts stated herein.
Information
For further information on technology, delivery terms and conditions and prices
please contact your nearest Infineon Technologies Office (www.infineon.com).
Warnings
Due to technical requirements components may contain dangerous substances.
For information on the types in question please contact your nearest Infineon
Technologies Office.
Infineon Technologies Components may only be used in life-support devices or
systems with the express written approval of Infineon Technologies, if a failure of
such components can reasonably be expected to cause the failure of that
life-support device or system, or to affect the safety or effectiveness of that device
or system.
Life support devices or systems are intended to be implanted in the human body,
or to support and/or maintain and sustain and/or protect human life. If they fail,
it is reasonable to assume that the health of the user or other persons may be
endangered.
2009-11-06
9