1132A AGILENT TECHNOLOGIES, 1132A Datasheet - Page 12

• Manufacturer Part Number: 1132A
• Description: TEST PROBE, OSCILLOSCOPE
• Manufacturer: AGILENT TECHNOLOGIES

Specifications of 1132A

• Test Probe Type: Oscilloscope
• Test Probe Functions: High Frequency
• Accuracy: ± 3%
• For Use With: Infiniium Series Oscilliscopes
• Lead Free Status / RoHS Status: na

High-Frequency Active Differential/Single-Ended Probe System
Agilent 1130A/31A/32A/34A InfiniiMax High-Performance Active Probe System
• InfiniiMax 7 GHz, 5 GHz, 3.5 GHz,
• Each InfiniiMax probe amplifier
• Unrivaled InfiniiMax probing
The Agilent InfiniiMax 1134A,
1132A, 1131A and 1130A probe
systems provide 7 GHz, 5 GHz,
3.5 GHz and 1.5 GHz of band-
width respectively, and offer the
following benefits:
• The new probes have a flat
12
and 1.5 GHz probing system
supports both differential and
single-ended measurements for
a more cost-effective solution
accessories support browsing,
solder-in, and socket use models
at the maximum performance
available
frequency response over the
entire bandwidth specification,
eliminating the distortion and
loading that affect probes with
in-band resonance. The probing
system enables engineers to
utilize their oscilloscope’s entire
bandwidth without being limited
to measuring only 50 Ω trans-
mission lines or using passive
resistive divider probes that
produce voltage measurement
error and circuit loading.
Designers can achieve system
measurement bandwidths of
4.5 to 6 GHz even when manu-
ally “browsing” with the probe.
Solder-in probe heads and
solder-in sockets provide even
higher bandwidths.
• The Agilent InfiniiMax 1130A
series probe system supports
a wide variety of real-world
applications with an exten-
sive line up of probe heads and
accessories. The accessories
can meet the most demanding
mechanical access requirements.
Small probe heads can be placed
between densely packed PC
boards. Solder-in sockets are
available for signals that need
frequent measurement. A dif-
ferential SMA probe head is
available to connect to fixtures
that have SMA connections. A
smart ergonomic design allows
users to set the spacing between
the probe pins (variable span).
When not concerned with min-
imum probe size, designers can
use a browsing sleeve to make
holding the probe more com-
fortable. Both probe tips of the
differential probe can “flex” to
support various probing angles
and target system characteristics
(z-axis compliance). Innovative
damped-wire accessories com-
pensate for the inductance and
capacitance associated with
the leads, and prevent distor-
tion of the measured signal.
Figure 3.3. InfiniiMax offers you the highest performance available
for measuring differential and single-ended signals.
• The groundbreaking design of
Agilent InfiniiMax 1130A probe
system also enables users to
make either single-ended or
differential measurements
from a single probe amplifier,
depending on their choice of
probe head and accessory. This
can result in significant savings
in cost and time. The common
mode rejection of the differen-
tial probe head reduces a mea-
surement’s noise floor. Overall,
the Agilent 1130 series probing
system delivers unmatched
performance, accuracy
and connectivity.
InfiniiMax: The World’s Best
High-Speed Oscilloscope
Probing System
EDN Magazine has awarded
Agilent’s InfiniiMax active probe
system the 2002 Innovation of
the Year Award.