72-7222 TENMA, 72-7222 Datasheet - Page 8

• Manufacturer Part Number: 72-7222
• Description: MULTIMETER, DIGITAL, CLAMP, 3-1/2 DIGIT
• Manufacturer: TENMA

Specifications of 72-7222

• Dmm Type: Clamp
• Voltage Measuring Range Dc: 200mV To 600V
• Voltage Measuring Range Ac: 2V To 600V
• Current Measuring Range Ac: 2A To 400A
• Temperature Measuring Range: -40°C To +1000°C

Rules For Safe Operation (2)
l When working at an effective voltage over
l Use the proper terminals, function, and range
l Do not use or store the Meter in an environment
l When using the test leads, keep your fingers
l Disconnect circuit power and discharge all high
l Replace the battery as soon as the battery indicator
l When servicing the Meter, use only the same
l The internal circuit of the Meter shall not be altered
l Soft cloth and mild detergent should be used to
l The Meter is suitable for indoor use.
l Turn the Meter off when it is not in use and take
l Periodically check the battery as it may leak
after some time. If leakage is apparent, the
battery should be immediately replaced to
prevent damage to the Meter.
60VDC or 30VAC RMS, special care should
be taken for there is danger of electric shock.
for your measurements.
of high temperature, humidity, explosive,
inflammable and strong magnetic field. The
performance of the Meter may deteriorate after
dampened.
behind the finger guards.
-voltage capacitors before testing resistance,
continuity and diode.
produce false readings that can lead to electric
shock and personal injury.
model number or identical electrical specifications
replacement parts.
at will to avoid damage of the Meter and any
accident.
clean the surface of the Meter when servicing.
No abrasive and solvent should be used to
prevent the surface of the Meter from corrosion,
damage and accident.
out the battery when not using for a long time.
appears. With a low battery, the Meter might
7
Model 72-7222: OPERATING MANUAL