K3SC-10 AC100-240 Omron, K3SC-10 AC100-240 Datasheet - Page 8

• Manufacturer Part Number: K3SC-10 AC100-240
• Description: RS-232/USBto-422/485 CONVERTER
• Manufacturer: Omron
• Type: Interface Converterr

Specifications of K3SC-10 AC100-240

• Accessory Type: Converter
• Analog / Digital: Analog
• Control Method: ON/OFF
• Voltage Rating: 100 VAC to 240 VAC
• Mounting: DIN Rail
• Size: 30 x 80 x 78
• Input Type: AC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: RS-232C/USB and RS-422/485
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: K3SC-10AC100-240; K3SC10AC100240

Safety Precautions
■ General Precautions
• Do not mount the product in the following places:
1. Locations subject to shock or vibration
2. Outdoor locations or locations subject to direct sunlight, wind, or
3. Locations subject to temperatures or humidity outside the
4. Locations subject to condensation or icing
5. Locations subject to large amounts of dust
6. Locations subject to flammable gases or objects
7. Locations subject to corrosive gases (in particular sulfide or
• Be sure to check power supply specifications, terminal numbers,
• Turn OFF the power supply before performing installation or wiring.
• Turn OFF the power supply before removing the terminal cover.
• Do not connect anything to unused terminals.
■ Correct Use
• Perform wiring with crimp terminals that are suitable for M3.5
• Install the product as far away as possible from devices that
• Do not pull on the USB cable. Doing so may cause the cable to
• Almost all application programs run with the K3SC driver, which
Do not touch any of the terminals while power is being
supplied. Doing so may result in electric shock.
Do not allow metal objects or wire cuttings to enter the
product. Doing so may result in electric shock, fire, or
malfunction.
Do not attempt to disassemble, repair, or modify the
product. Any attempt to do so may result in malfunction,
fire, or electric shock.
Make sure that the power supply voltage is within the
specified range. Otherwise, damage or burning may
result.
Be sure to tighten the terminal screws to the specified
torque. Loose screws may result in burning or
malfunction. The recommended tightening torque is
0.78 N·m.
and polarities before performing wiring.
Accidentally touching the terminals may result in electric shock.
screws.
generate strong high-frequency noise (e.g., high-frequency
welders) or surges.
come loose.
provides a virtual communications port for USB communications.
Some application programs do not run, because this driver does
not support all of the API functions.
rain.
specified ranges
ammonia gases)
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
!CAUTION
In the interest of product improvement, specifications are subject to change without notice.
K3SC
8