CS1W-AD161 Omron, CS1W-AD161 Datasheet - Page 14

• Manufacturer Part Number: CS1W-AD161
• Description: CS1 16 Pt Analog Inp Conn Type
• Manufacturer: Omron

Specifications of CS1W-AD161

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Function Blocks (Unit Ver. 3.0)
Note: 1. High-speed control of function blocks is supported (the operation cycle can be set to 0.01 s, 0.02 s, or 0.05 s), except when using the
Sequence Control Blocks
Note: High-speed control of function blocks is supported (the operation cycle can be set to 0.01 s, 0.02 s, or 0.05 s), except when using the CS1D-
Pulse Train Operation
Others
Sequence Operation
Contact Type Control
Target
Sequence Control
2. LCB05D not supported.
3. Supported by the CS1W-LC001 only.
LCB05D.
Type
Type
LCB05D.
Accumulated Value Input
Adder
Accumulated Value Analog
Multiplier
Accumulator for Accumu-
lated Value Input
Contact input/Accumulat-
ed Value Output
Accumulated Value Input/
Contact Output
Analog/Pulse Width Con-
verter (See note 1.)
Contact Distributor
Constant Comparator
(See note 1.)
Variable Comparator
(See note 1.)
Timer (See note 1.)
ON/OFF Timer
(See note 1.)
Clock Pulse (See note 1.)
Counter (See note 1.)
Internal Switch
(See note 1.)
Level Check (See note 1.) Checks an analog input for 8 levels and outputs a contact corresponding to the level. The
ON/OFF Valve Manipulator Manipulates and monitors ON/OFF valves with open/close limit switches.
Motor Manipulator
Reversible Motor Manipula-
tor
Motor Opening Manipulator Inputs a target opening, and manipulates an electric positional-proportional motor.
Step Ladder Program
(See note.)
Sequence Table
(See note.)
Block Name
Block Name
Adds up to four accumulated value signals.
Multiplies analog signals by the accumulated value signals.
Converts 4-digit accumulated value signals to 8 digits.
Counts low-speed contact pulses, and outputs 8-digit accumulated signals.
Converts 4-digit accumulated value signals to low-speed contact pulses before they are out-
put.
Changes the ON/OFF duration ratio in a constant cycle duration so that it is proportional to
the analog signal.
Connect contact signals between function blocks in a 1:1 connection.
Compares up to eight sets of analog signals and constants, and outputs the comparison re-
sults as contacts.
Compares up to eight pairs of analog signals, and outputs the comparison results as con-
tacts.
2-stage output type addition timer for forecast values and reached values. Can also output
the present value.
Timer for performing ON-OFF operation at preset ON and OFF times.
Manipulates and monitors ON/OFF valves with open/close limit switches.
2-stage output type addition timer for forecast values and arrival values. Can also output the
current value.
Temporary storage contact for accepting relays in the Step Ladder Program block.
(Note: One internal switch is already allocated as “temporary storage” in CX-Process Tool.)
level number is also output as an analog value.
Manipulates and monitors motor operation.
Manipulates and monitors reversible motor operation.
Performs logic sequence and step progression control.
Performs logic sequence and step progression control based on conditions and actions listed
in tabular form.
Function
Function
Sequence Control Blocks
19