ZEN-10C2AR-A-V2 Omron, ZEN-10C2AR-A-V2 Datasheet - Page 92

• Manufacturer Part Number: ZEN-10C2AR-A-V2
• Description: 100/240 VAC 6 IN, 4 OUT
• Manufacturer: Omron
• Series: ZEN V2r
• Type: Expandabler

Specifications of ZEN-10C2AR-A-V2

• Voltage - Supply: 100 ~ 240VAC
• Number Of I /o: 6 Input, 4 Output
• Display Type: LED
• Output Type: Relay
• Voltage Rating: 100 V to 240 V
• Input Type: AC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Kit Contents: -
• Analog Inputs: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: Z2680; ZEN10C2ARAV2

Confirming Ladder Program Operation
3-4
Procedure for Checking Operation
Checks Before Turning ON the Power
Operation Checks
Method for Checking Operation
Precautions for Safe Use
Confirming Ladder Program Operation
Always check the ladder program operation before using the ZEN.
1.
2.
3.
4.
5.
• Before turning ON the power, check that all wiring has been
• For systems with loads connected to the outputs that may cause
• Always ensure safety in the vicinity before switching the
• Check the operation by the flashing input and output displays on
• Check the operation by using the Ladder Program Monitor (not
• Connect the ZEN Support Software and check operation using
performed correctly.
serious injury or damage to equipment if operation is incorrect,
remove the output wiring before performing trial operation.
operating mode (RUN/STOP).
Check that the ZEN is mounted and wired correctly.
Check that the operation of the ZEN will not have a negative
impact on the system. Check for any dangers.
Turn ON the power supply to the ZEN.
The ZEN will start in RUN Mode when power is turned ON.
Turn each input ON and OFF and check that the program is
operating correctly.
Adjust any problems.
the Main Screen (not including LED-type CPU Units).
including LED-type CPU Units).
the monitor function. Refer to the operation manual for the ZEN
Support Software.
Section 3-4
69