8808A 120V Fluke Electronics, 8808A 120V Datasheet - Page 14
![DMM 5.5 RES RS-232 INTERFACE](/photos/27/4/270432/8808a-120v_sml.jpg)
8808A 120V
Manufacturer Part Number
8808A 120V
Description
DMM 5.5 RES RS-232 INTERFACE
Manufacturer
Fluke Electronics
Type
Digital (DMM)r
Specifications of 8808A 120V
Includes
Test Leads
Style
Bench
Display Digits
5.5
Display Type
VFD, Dual
Display Count
200000
Function
Voltage, Current, Resistance, Frequency
Functions, Extra
Continuity, dB, Diode Test
Features
Hold, Min/Max, RS-232 Port
Ranging
Auto/Manual
Response
True RMS
Lead Free Status / RoHS Status
Not applicable / RoHS non-compliant
Other names
614-1068
8808A
Getting Started Manual
8
Connecting to Line Power
North America
North America
Universal Euro
United Kingdom
Switzerland
Australia
South Africa
LC-1
To avoid shock hazard, connect the factory supplied three-
conductor line power cord to a properly grounded power outlet.
Do not use a two-conductor adapter or extension cord, as this
will break the protective ground connection. If a two-conductor
power cord must be used, a protective grounding wire must be
connected between the ground terminal and earth ground
before connecting the power cord or operating the Meter.
1. Verify that the line voltage is set to the correct setting.
2. Verify that the correct fuse for the line voltage is installed.
3. Connect the power cord to a properly grounded three-prong outlet. See Figure 3
Type
LC-5
for line-power cord types available from Fluke. Refer to Table 4 for descriptions
of the line-power cords.
Figure 3. Line-Power Cord Types Available from Fluke
Table 4. Line-Power Cord Types Available from Fluke
LC-2
XW Warning
Voltage / Current
120 V / 15 A
240 V / 15 A
220 V / 16 A
240 V / 13 A
220 V / 10 A
240 V / 10 A
240 V / 5 A
LC-6
LC-3
Fluke Model Number
LC-7
LC-4
LC-1
LC-2
LC-3
LC-4
LC-5
LC-6
LC-7
alh3.eps