CYII4SM014KAA-GWC Cypress Semiconductor Corp, CYII4SM014KAA-GWC Datasheet - Page 3

• Manufacturer Part Number: CYII4SM014KAA-GWC
• Description: IC SENSOR IMAGE MONO 49-PGA
• Manufacturer: Cypress Semiconductor Corp
• Type: CMOS Imagingr

Specifications of CYII4SM014KAA-GWC

• Pixel Size: 8µm x 8µm
• Active Pixel Array: 3048H x 4560V
• Frames Per Second: 3
• Voltage - Supply: 3.3V
• Package / Case: 49-PGA
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant

Color Filter Array (CFA)
Figure 3. Color Filter Arrangement on the Pixels
The IBIS4-14000 can also be processed with a Bayer RGB color
pattern. Pixel (0,0) has a green filter and is situated on a
green-red row.
Figure 4
of the wavelength. Note that this response curve includes the
optical cross talk and the NIR filter of the color glass lid as well
(see
lid).
Document #: 38-05709 Rev. *D
“Cover Glass”
shows the response of the color filter array as a function
on page 24 for response of the color glass
Figure 4. Color Filter Response Curve
Output Stage
Unity gain buffers are implemented as output amplifiers. These
amplifiers can be directly DC-coupled to the analog-digital
converter or coupled to an external programmable gain amplifier.
The (dark reference) offset of the output signal is adjustable
between 1.7V and 3V. The amplifier output signal is negative
going with increasing light levels, with a max. amplitude of 1.2V
(at 4V reset voltage, in hard reset mode). The output signal range
of the output amplifiers is between 0.5V and 3V.
Notes on analog video signal and output amplifier specifications:
■
■
■
■
Video polarity: the video signal is negative going with increasing
light level.
Signal offset: the analog offset of the video signal is settable
by an external DC bias (pin 12 DARKREF). The settable range
is between 1.7V and 3V, with 2.65V being the nominal expected
set point. Hence, the output range (including 1.2V video signal)
is between 3V and 0.5V.
Power control: the output amplifiers can be switched between
an “operating” mode and a “standby” mode via the serial port
of the imager (see
ration).
Coupling: the IBIS4-14000 can be DC- or AC-coupled to the
AD converter.
“SPI Register ”
CYII4SM014KAA-GEC
CYII4SC014KAA-GTC
on page 12 for the configu-
Page 3 of 27
[+] Feedback