ZMOTIONL100ZCOG Zilog, ZMOTIONL100ZCOG Datasheet - Page 50

• Manufacturer Part Number: ZMOTIONL100ZCOG
• Description: EVALUATION KIT Z8FS040 ZMOTION
• Manufacturer: Zilog
• Series: ZMOTION™r

Specifications of ZMOTIONL100ZCOG

• Sensor Type: Motion, PIR (Pyroelectric Infrared)
• Sensing Range: 5m x 5m, 60 Degree Detection Pattern
• Interface: Serial
• Sensitivity: Adjustable
• Voltage - Supply: 5V
• Embedded: Yes
• Utilized Ic / Part: Z8FS040B
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 269-2511

Appendix A. Application Schematics
PS028511-0112
8-Pin Z8FS040xSB20EG MCU
The ZMOTION Detection and Control MCU is available in 8-pin, 20-pin and 28-pin parts
and configurable with dual and quad pyro sensor and lens combinations.
Figure 10 shows an example circuit for part number Z8FS040xSB20EG, an 8-pin ZMO-
TION Detection and Control MCU. The interface to the pyroelectric sensor is via the ded-
icated input ANA2 (pin 5). The status LED is driven by pin 6 which is normally
configured as a GPIO by the application to control the state of the LED. Pin 2 is used as
the debug input to the chip, but can be used for other functions as required. Pin 4 is set up
for the Reset function, but may also be used for other functions as the application requires.
Pull-up resistors (10K) are provided on the Debug and Reset signals as required for the
Debug interface. The signals on pins 3 and 7 can be used as required. The power supply
design is left to the application requirements.
In DUAL PYRO Mode, the second Pyroelectric sensor is connected to Pin 3 (ANA3). All
other connections remain the same.
ZMOTION™ Detection and Control Family
Product Specification
Application Schematics
43