AD5722AREZ Analog Devices Inc, AD5722AREZ Datasheet - Page 17

• Manufacturer Part Number: AD5722AREZ
• Description: Dual 12Bit DAC 1 LSB INL
• Manufacturer: Analog Devices Inc

Specifications of AD5722AREZ

• Design Resources: Software Configurable 12-Bit Dual-Channel Unipolar/Bipolar Voltage Output Using AD5722 (CN0094)
• Settling Time: 10µs
• Number Of Bits: 12
• Data Interface: Serial
• Number Of Converters: 2
• Voltage Supply Source: Analog and Digital, Dual ±
• Power Dissipation (max): 190mW
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 24-TSSOP Exposed Pad, 24-eTSSOP, 24-HTSSOP
• Number Of Channels: 2
• Resolution: 12b
• Interface Type: Serial (3-Wire, SPI, QSPI, Microwire)
• Single Supply Voltage (typ): 5/9/12/15V
• Dual Supply Voltage (typ): ±5/±9/±12/±15V
• Architecture: Resistor-String
• Power Supply Requirement: Single/Dual
• Output Type: Voltage
• Integral Nonlinearity Error: ±1LSB
• Single Supply Voltage (min): 4.5V
• Single Supply Voltage (max): 16.5V
• Dual Supply Voltage (min): ±4.5V
• Dual Supply Voltage (max): ±16.5V
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 24
• Package Type: TSSOP EP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

DC Crosstalk
This is the dc change in the output level of one DAC in response
to a change in the output of another DAC. It is measured with a
full-scale output change on one DAC while monitoring another
DAC. It is expressed in LSBs.
Digital Crosstalk
Digital crosstalk is a measure of the impulse injected into the
analog output of one DAC from the digital inputs of another
DAC but is measured when the DAC output is not updated. It is
specified in nV-sec and measured with a full-scale code change
on the data bus.
Rev. C | Page 17 of 32
DAC-to-DAC Crosstalk
DAC-to-DAC crosstalk is the glitch impulse transferred to the
output of one DAC due to a digital code change and a subsequent
output change of another DAC. This includes both digital and
analog crosstalk. It is measured by loading one of the DACs
with a full-scale code change (all 0s to all 1s and vice versa) with
LDAC low and monitoring the output of another DAC. The
energy of the glitch is expressed in nV-sec.
AD5722/AD5732/AD5752