EVAL-ADT7X10EBZ Analog Devices Inc, EVAL-ADT7X10EBZ Datasheet - Page 5

• Manufacturer Part Number: EVAL-ADT7X10EBZ
• Description: Evaluation Board I.c.
• Manufacturer: Analog Devices Inc

Specifications of EVAL-ADT7X10EBZ

• Sensor Type: Temperature
• Sensing Range: -55°C ~ 150°C
• Interface: I²C
• Sensitivity: ±0.5°C
• Voltage - Supply: 2.7 V ~ 5.5 V
• Embedded: No
• Utilized Ic / Part: ADT7410
• Silicon Manufacturer: Analog Devices
• Silicon Core Number: ADT7410
• Kit Application Type: Sensing - Temperature
• Application Sub Type: Temperature Sensor
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: EVAL-ADT7410EBZ; EVAL-ADT7410EBZ

Evaluation Board User Guide
EVALUATION BOARD SOFTWARE
The evaluation software is operated in conjunction with the
evaluation hardware and allows you to investigate the properties
of the ADT7310/ADT7410.
INSTALLING AND RUNNING THE SOFTWARE
The software should be installed before the evaluation board is
plugged into the host computer.
To install the evaluation software, run the AD7x10 Evaluation
Software Install.exe program from the evaluation kit CD, and
follow all on-screen installation instructions. The software installs
by default into the ADT7x10 Evaluation Software directory within
the Analog Devices folder, accessible from your Programs menu.
Before running the software, ensure that the evaluation board is
plugged into the USB port of the host computer. Run the software
from the ADT7x10 Evaluation Software directory.
Figure 3. ADT7x10 Evaluation Software Start-Up Window
Figure 4. Select On Board or External Part Window
Rev. 0 | Page 5 of 12
SELECTING THE DEVICE TO EVALUATE
Select to evaluate the ADT7410 or ADT7310 (see Figure 3). The
ADT7410 uses I
SPI communication with the on-board host microcontroller.
Selecting an External Part or an On-Board Part
It is possible to evaluate the on-board ADT7310/ADT7410 or to
evaluate ADT7310/ADT7410 devices that are external to the main
board. A secondary board is included in the evaluation kit to enable
temperature testing of parts that are remote from the main board.
The secondary evaluation board, or any other external ADT7310
or ADT7410 device, should be connected to the main board
through Connector J2.
Click the relevant button (On Board or External) to select an
on-board device or an external device to evaluate (see Figure 4).
2
C communication, whereas the ADT7310 uses
UG-047