SX-550-1701 Silex Technology, SX-550-1701 Datasheet - Page 33
SX-550-1701
Manufacturer Part Number
SX-550-1701
Description
WiFi / 802.11 Modules & Development Tools 802.11a/b/g Bridge Serial Server
Manufacturer
Silex Technology
Datasheet
1.SX-550-6900.pdf
(122 pages)
Specifications of SX-550-1701
Interface Type
UART
Board Size
59.6 mm x 49.1 mm x 14.3 mm
Security
802.1xEAP, PEAP, WEP, WPAPSK, TKIP, WPA2, AES
Operating Voltage
3.3 VDC
Operating Temperature Range
0 C to + 50 C
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
- Current page: 33 of 122
- Download datasheet (7Mb)
task one time -- once the address has been configured, the SX-550 can be accessed from any computer
on the network that has the appropriate privileges. The steps are as follows:
1.
2.
Part Number 40183-101
the following procedure for the first-time IP configuration of the SX-550.
If your network has a DHCP server and you can use an Ethernet connection to the SX-550:
If you can connect the SX-550 via Ethernet but do not have a DHCP server, then you must use
a. Make sure your PC is connected and has access to your network.
b. Connect an Ethernet cable from your network hub to the SX-550 (if you have a wireless
c. Power on the SX-550.
d. The administration program on most DHCP servers logs the IP address and MAC
e. If your DHCP server does not provide client information or if you do not have access to
f.
a. Make sure your PC is connected and has access to your network
b. Connect an Ethernet cable from your network hub to the SX-550. The SX-550 must be
c. From the Windows Command Prompt (MS-DOS Prompt), the Mac OS X Terminal Utility,
SX-550 and do not have hardwired capabilities, then you must go to Step 4 below for
setup instructions).
address of each DHCP client. The MAC address of the SX-550 can be found on the
label affixed to the unit. If your DHCP server has logged this information, write down the
IP address of the SX-550 for future reference. You are now ready to configure the SX-
550 (skip the remainder of this section).
the DHCP server, then you can get the IP address by connecting a serial device such as
a printer, a Windows PC running HyperTerminal, or another serial device capable of
printing ASCII characters to serial port 1 on the SX-550 (the cable supplied with the SX-
550-6900 Evaluation Daughtercard will work with many such devices). If you are not
using the Evaluation Daughtercard, then you must provide the appropriate cable to
connect pins 9, 11, and one of the ground pins on the OEM header to the terminal
(transmit data on the SX-550 must connect to receive data on the terminal, and vice-
versa). Your serial device must be set at 115.2Kbps, 8-bit character size, and no parity.
With the serial device and SX-550 switched on and ready, press the Test button on the
SX-550-6900 Evaluation Daughtercard, or short GPIO7 on the OEM header to ground
(4.7 K-ohm pull-up resistor connected to +3.3 VDC).
configuration data to be sent to the connected serial device. The serial device should
display or print the current IP address assigned to the SX-550 by your network DHCP
service. Write down this address for future reference. You are now ready to configure the
SX-550 (skip the remainder of this section).
on the same network segment as the PC (that is, there can be no router between the SX-
550 and the PC).
or the UNIX/Linux command line, enter the command
arp –s ipaddress macaddress
ping ipaddress
Where ipaddress is the desired IP address of the SX-550 and macaddress is the
MAC address of the SX-550 (found on the label affixed to the SX-550). For
example:
arp –s 192.168.5.53 00:40:17:00:00:01
ping 192.168.5.53
Note that Windows systems use the format xx-xx-xx-xx-xx-xx for the MAC
Silex SX-550 Developer's Guide
This will cause the SX-550
Page 25
Related parts for SX-550-1701
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
WiFi / 802.11 Modules & Development Tools SS Developers Kit need buy sx-550-1701
Manufacturer:
Silex Technology
Datasheet:
Part Number:
Description:
WiFi / 802.11 Modules & Development Tools 802.11a/b/g Bridge Serial Server
Manufacturer:
Silex Technology
Datasheet:
Part Number:
Description:
WiFi / 802.11 Modules & Development Tools Wired Internal OEM 10/100 Serial Server
Manufacturer:
Silex Technology
Datasheet:
Part Number:
Description:
WiFi / 802.11 Modules & Development Tools Internal OEM SDIO Atheros Crd802.11abg
Manufacturer:
Silex Technology
Datasheet:
Part Number:
Description:
WiFi / 802.11 Development Tools Eval Kit for SX-570/SX-580
Manufacturer:
Silex Technology
Datasheet:
Part Number:
Description:
Networking Modules & Development Tools 10/100 USB Device Server
Manufacturer:
Silex Technology
Datasheet:
Part Number:
Description:
Networking Modules & Development Tools 802.11 b/g Wireless USB Device Server
Manufacturer:
Silex Technology
Datasheet:
Part Number:
Description:
WiFi / 802.11 Modules 802.11a/b/g/n USB dev server, 2 ports
Manufacturer:
Silex Technology
Datasheet:
Part Number:
Description:
WiFi / 802.11 Modules & Development Tools AR6002 Radio Evaluation Kit
Manufacturer:
Silex Technology
Datasheet:
Part Number:
Description:
WiFi / 802.11 Modules & Development Tools 802.11abg SDIO Card Open Source Drivers
Manufacturer:
Silex Technology
Datasheet:
Part Number:
Description:
WiFi / 802.11 Modules WiFi SDIO Radio Card w/cable and antenna
Manufacturer:
Silex Technology
Datasheet:
Part Number:
Description:
WiFi / 802.11 Modules 802.11a/b/g/n USB dev server, 2 ports
Manufacturer:
Silex Technology
Datasheet:
Part Number:
Description:
WiFi / 802.11 Modules WiFi SDIO Radio Card
Manufacturer:
Silex Technology
Datasheet:
Part Number:
Description:
WiFi / 802.11 Modules 802.11a/b/g/n Mini PCI card, 3x3MIMO
Manufacturer:
Silex Technology
Datasheet:
Part Number:
Description:
WiFi / 802.11 Modules 802.11b/g SDIO Surfa ce Mount Mod Sample
Manufacturer:
Silex Technology
Datasheet: