SX-550-1701 Silex Technology, SX-550-1701 Datasheet - Page 104

• Manufacturer Part Number: SX-550-1701
• Description: WiFi / 802.11 Modules & Development Tools 802.11a/b/g Bridge Serial Server
• Manufacturer: Silex Technology

Specifications of SX-550-1701

• Interface Type: UART
• Board Size: 59.6 mm x 49.1 mm x 14.3 mm
• Security: 802.1xEAP, PEAP, WEP, WPAPSK, TKIP, WPA2, AES
• Operating Voltage: 3.3 VDC
• Operating Temperature Range: 0 C to + 50 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

SET IP FTIme
SET IP FTP
SET IP HTTP
SET IP KEepalive
SET IP LPD
SET IP MEthod
SET IP PIng
SET IP PRObe
SET IP RARp
Part Number 40183-101
Command
Sets IP timeout
If enabled, the IP timeout is measured in seconds. If disable, the IP timeout is in
minutes.
The default value is Disable.
Format:
Enables or disables FTP protocol
The default value is Enable.
Format:
Enables or disables HTTP protocol
The default value is Enable.
Format:
Sets interval in minutes for sending TCP keepalive packets on a connection
The default value is 5 minutes.
Format:
Enables or disables the LPD protocol
The default value is Enable.
Format:
Sets method of getting IP address
The default value is Auto.
Format:
Sends IP ping packets to test connection to remote host
Format:
Enables or disables TCP connection probes
The default value is Disable.
Format:
Enables setting of default router and/or subnet mask based on RARP IP address set
The default value is 0.
Format:
SET IP [ENable | DIsable]
SET IP FTIme
SET IP FTP
SET IP HTTP
SET IP KEepalive n
SET IP LPD
SET IP MEthod
SET IP PIng
SET IP PRObe
Silex SX-550 Developer's Guide
aa.bb.cc.dd
[ENable | DIsable]
[ENable | DIsable]
[ENable | DIsable]
[ENable | DIsable]
[ENable | DIsable]
[ AUTO | BOOTP | RARP | DHCP | STATIC ]
Description
Page 96