CY3210-28XXX Cypress Semiconductor Corp, CY3210-28XXX Datasheet - Page 17

• Manufacturer Part Number: CY3210-28XXX
• Description: EVALUATION POD FOR CY8C28X PSOC
• Manufacturer: Cypress Semiconductor Corp
• Series: PSoC®r

Specifications of CY3210-28XXX

• Accessory Type: Emulation Pod
• Interface Type: ICE, I2C, RS232, MiniProg,
• Operating Supply Voltage: 9V, 12 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: CY8C28 Family
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

2.3.6
2.3.7
CY3280-28XXX Universal CapSense® Controller Development Kit Guide, Spec. # 001-57457 Rev. **
}
4. Select Build > Generate/Build 'MyProject' Project and verify the compile finishes with no errors.
Programming the CY3280-28XXX Board
1. Connect your computer to the CapSense test board ISSP Connector (J3) using the PSoC
2. In PSoC Designer, select Program > Program Part. The PSoC Programmer application opens
3. From the Port menu, select MiniProg1/<Identification Code>.
4. Click Program. "Programming Succeeded..." appears in the Actions pane when programming is
Testing the Board
1. Click Toggle Device Power.
2. Touch one or more buttons with your finger. The associated LEDs light up corresponding to the
3. When you are done, click Toggle Device Power, and close PSoC Programmer.
4. Return to PSoC Designer and select File > Save Project.
MiniProg and a USB cable. If this is your first time using the MiniProg, you will need to install the
driver before proceeding. Follow the instructions in
complete
buttons being pressed.
}
M8C_DisableGInt;
for(i=0;i<15;i++)
M8C_EnableGInt;
I2C_Buf[i] = CSD2X_1_waSnsDiff[i];
2.2.1 Powering the Board on page
/* disable global interrupt */
/* set the buffer */
/* enable global interrupt */
11.
Quick Start
17
[+] Feedback