FC100V10AG POWER ONE, FC100V10AG Datasheet - Page 8

• Manufacturer Part Number: FC100V10AG
• Manufacturer: POWER ONE

Specifications of FC100V10AG

• Operating Temperature Min Deg. C: -40C
• Rad Hardened: No
• Lead Free Status / RoHS Status: Compliant

F2410 & F4810 Applications
Differential and Common Mode filtering for DC-DC
converters with 48 V and 24 V input:
 Telecommunications
 Data communications
 Distributed Power Solutions
Description
The F4810 and F2410 Input Filters minimize the conducted and radiated emissions generated by switch mode
DC-DC converters, and allow board designs utilizing DC-DC converters to meet stringent FCC and EN55022
Class B conducted emissions requirements.
Unlike most available off-the-shelf filter modules, the F4810 and F2410, in addition to common mode noise
reduction components, are provisioned with a differential LC-filter stage, which virtually guarantees compliance
with conducted noise standards across the frequency range from 150 kHz to 30 MHz, including fundamental
switching frequency and its harmonics. Test results show headroom of 15-20 dB for conducted noise quasi-peak
levels, in relation to Class B requirements.
F4810/F2410 filters are designed specifically for distributed power solutions in conjunction with dc-dc converters.
Low profile and small size (less than 1 sq. in.) in a surface mount package helps the designer save system board
real estate, and simplifies the layout.
A single filter can be used with multiple converters, and is capable of providing up to 10 A to the converter input
bus at 85 °C. When used as specified within this data sheet, these filters do not require airflow and/or derating at
high temperatures.
MCD10059 Rev. 1.1, 21-Jan-10
F4810 (on left) and F2410 Input Filters
F2410 & F4810, 0-45V/0-80V, 10 Amps, SMT Mount
F & FC Series DC-DC Converter Input Filters
Page 8 of 41
Features













RoHS lead free solder and lead solder exempted
products are available
Maximum current 10 A with no derating
Maximum operating input voltage 80 V
(45 V for F2410 version)
100V/50V 100 ms transient withstand capability
Differential LC-filter stage
Surface mounted design
Small footprint – less than 1 sq. in.
Low profile: 0.378” [9.6 mm] maximum
Low weight: 0.34 oz [9.5 g]
Operation over -40 °C to 85 °C ambient
temperature range
No airflow required up to 85 °C
Enables DC-DC converter compliance with
EN55022 and FCC Class B requirements
conducted emissions
Safety approved to UL/CSA60950-1, EN60950-1,
and IEC60950-1
www.power-one.com