CP-BNCPC-017 Emerson Network Power, CP-BNCPC-017 Datasheet - Page 221

• Manufacturer Part Number: CP-BNCPC-017
• Manufacturer: Emerson Network Power
• Type: BNCr

Specifications of CP-BNCPC-017

• Gender: RCP
• Body Style: Right Angle
• Terminate To: PCB
• Mounting Style: Through Hole
• Termination: Solder
• Operating Temp Range: -55C to 85C
• Operating Frequency: 0 to 4
• Body Plating: Nickel
• Contact Plating: Gold
• Contact Material: Brass/BeCu
• Body Material: Zinc/Brass
• Impedance: 50Ohm
• Lead Free Status / RoHS Status: Compliant

SMA Right Angle Solder Type
Plug for Semi-Rigid Cable
Connectivity Solutions
Tel: [phone]
•
Fax: [phone]
RG-405/U (.086 Semi-Rigid)
RG-402/U (.141 Semi-Rigid)
CABLE GROUP
Assembly Instructions
•
www.EmersonNetworkPower.com/connectivity
INCHES (MILLIMETERS) • CUSTOMER DRAWINGS AVAILABLE ON REQUEST
1. Identify connector parts. (2 piece parts)
2. Strip cable to dimensions shown. Do not nick
3. Insert cable into body making certain that the
4. Solder body to cable using 60/40 tin/lead solder
5. Press end cap into body access port using .187
center conductor during strip operations.
cable jacket is butted against internal body shoul-
der and cable dielectric is started into cross hole.
Solder center conductor to contact using 60/40
tin/lead solder as shown. Use a minimum amount
of solder for a good joint.
as shown. Use a minimum of heat to minimize
cable dielectric growth. Any growth of cable
dielectric shall be flush with contact.
(4.75) dia. flat punch.
142-0693-101/106
142-0694-101/106
PART NO.
.145 (3.68)
.170 (4.32)
“A”
.075 (1.90)
.105 (2.67)
“B”
221