AFBR-57R5AP Avago Technologies US Inc., AFBR-57R5AP Datasheet - Page 9

• Manufacturer Part Number: AFBR-57R5AP
• Description: Fiber Optic Transmitters, Receivers, Transceivers Transceiver
• Manufacturer: Avago Technologies US Inc.

Specifications of AFBR-57R5AP

• Function: Digital Diagnostic SFP, supports high-speed serial links over multimode optical fiber.
• Product: Transceiver
• Data Rate: 4.25 GBd, 2.125 GBd, 1.0625 GBd
• Wavelength: 850 nm
• Maximum Rise Time: 150 ps, 90 ps
• Maximum Fall Time: 150 ps, 90 ps
• Pulse Width Distortion: 0.06 ns, 0.062 ns
• Operating Supply Voltage: 2.97 V to 3.63 V
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 10 C
• Package / Case: SFP-20
• For Use With: Multimode Glass
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

9
Table 6. Transmitter and Receiver Electrical Characteristics
(T
Parameter
High Speed Data Input:
High Speed Data Output:
Receiver Contributed Total Jitter
Receiver Contributed Total Jitter
Receiver Contributed Total Jitter
Receiver Electrical Output Rise & Fall Times
Notes:
1. Internally AC coupled and terminated (100 Ohm differential).
2. Internally AC coupled but requires an external load termination (100 Ohm differential).
3. Contributed DJ is measured on an oscilloscope in average mode with 50% threshold and K28.5 pattern. Contributed TJ is the sum of contributed RJ
4. 20%-80% electrical rise & fall times measured with a 500 MHz signal utilizing a 1010 data pattern.
C
and contributed DJ. Contributed RJ is calculated for 1x10
oscilloscope by 14. Per FC-PI (Table 13 - MM jitter output, note 1), the actual contributed RJ is allowed to increase above its limit if the actual
contributed DJ decreases below its limits, as long as the component output DJ and TJ remain within their specified FC-PI maximum limits with the
worst case specified component jitter input.
Transmitter Differential Input Voltage (TD +/-)
Receiver Differential Output Voltage (RD +/-)
(4.25 Gb/s)
(2.125 Gb/s)
(1.0625 Gb/s)
(20-80%)
= -10 C to 85 C, VccT, VccR = 3.3 V 10%)
-12
BER by multiplying the RMS jitter (measured on a single rise or fall edge) from the
Symbol
V
Vo
TJ
TJ
TJ
tr, tf
I
Minimum
400
600
50
Typical
Maximum
2400
1600
0.26
62
0.26
124
0.22
205
150
Unit
mV
mV
UI
ps
UI
ps
UI
ps
ps
Note 2
Notes
Note 1
Note 3
Note 3
Note 3
Note 4