IPS-VIDEO Altera, IPS-VIDEO Datasheet - Page 145

• Manufacturer Part Number: IPS-VIDEO
• Description: MegaCore Suite W/ 17 DSP Video/image Processing Functions
• Manufacturer: Altera
• Type: -r

Specifications of IPS-VIDEO

• Software Application: IP CORE, SUITES
• Supported Families: Arria GX, Cyclone II, HardCopy II, Stratix II
• Core Architecture: FPGA
• Core Sub-architecture: Arria, Cyclone, Stratix
• Rohs Compliant: NA
• Function: Suite of IP Functions for Video and Image Processing
• License: Initial License
• Lead Free Status / RoHS Status: na
• Lead Free Status / RoHS Status: na

Chapter 5: Functional Descriptions
Test Pattern Generator
Table 5–27. Test Pattern Generator Avalon-ST Video Protocol Parameters (Part 1 of 2)
January 2011 Altera Corporation
Frame Width
Frame Height
Interlaced /
Progressive
Bits per Color Sample
Color Space
Parameter
Output Data Types
1
The Test Pattern Generator MegaCore function supports a wide range of resolutions
and color spaces with either a sequential or parallel data interface.
In all combinations of color space and subsampling that are allowed, the stream of
pixel data is of a type consistent with the conventions adopted by the other MegaCore
functions in the Video and Image Processing Suite.
The Test Pattern Generator MegaCore function can output streams of pixel data of the
types shown in
The Test Pattern Generator cannot produce interlaced streams of pixel data with an
odd frame height. To create interlaced video streams where F0 fields are one line
higher than F1 fields, Altera recommends feeding Test Pattern Generator progressive
video output into the Interlacer MegaCore function.
Width selected in the parameter editor. Can be run-time controlled in which case, the value
specified in the GUI is the maximum allowed value.
Height selected in the parameter editor. Can be run-time controlled in which case, the value
specified in the GUI is the maximum allowed value.
Mode selected in the parameter editor.
Number of bits per color sample selected in the parameter editor.
As selected in the parameter editor. RGB (4:4:4 subsampling only) or YCbCr.
go = 0;
while (true)
{
do once for progressive output or twice for interlaced output
{
}
}
status = 0;
while (go != 1 )
read_control();
status = 1;
send_control_packet();
send_image_data_header();
output_test_pattern ();
wait();
Table
5–27.
//Copies control to internal register
Value
Video and Image Processing Suite User Guide
5–65