BOXD410PT Intel, BOXD410PT Datasheet - Page 21

• Manufacturer Part Number: BOXD410PT
• Description: BOARD, D410PT W/ATOM PROC D410
• Manufacturer: Intel
• Type: Desktop Boardr

Specifications of BOXD410PT

• Kit Features: Single-core Intel Atom Processor, NM10 Express Chipset, Hardware Monitor Subsystem, LAN Support
• Silicon Manufacturer: Intel
• Kit Contents: Board
• Features: 10/100 Integrated LAN, Graphics Output

LAN Wake Capabilities
Wake from USB
Wake from PS/2 Device
PME# Wakeup Support
Wake from Serial Port
The board’s LAN wake capabilities enable remote wake-up of the computer through a
network. The LAN subsystem network adapter monitors network traffic at the Media
Independent Interface. The board supports LAN wake capabilities with ACPI in the
following ways:
•
•
Upon detecting the configured wake packet type, the LAN subsystem asserts a wake-
up signal that powers up the computer.
USB bus activity wakes the computer from an ACPI S1 or S3 state.
NOTE
Wake from USB requires the use of a USB peripheral that supports wake from USB.
PS/2 keyboard activity wakes the computer from an ACPI S1, S3, S4, or S5 state.
However, when the computer is in an ACPI S4 or S5 state, the only PS/2 activity that
will wake the computer is the Alt + Print Screen key combination or the Power key
available only on some keyboards.
When the PME# signal is asserted on the PCI bus, the computer wakes from an ACPI
S1, S3, S4, or S5 state.
Serial port activity wakes the computer from an ACPI S1 or S3 state.
By Ping
By Magic Packet
21