BOXD410PT Intel, BOXD410PT Datasheet - Page 17

• Manufacturer Part Number: BOXD410PT
• Description: BOARD, D410PT W/ATOM PROC D410
• Manufacturer: Intel
• Type: Desktop Boardr

Specifications of BOXD410PT

• Kit Features: Single-core Intel Atom Processor, NM10 Express Chipset, Hardware Monitor Subsystem, LAN Support
• Silicon Manufacturer: Intel
• Kit Contents: Board
• Features: 10/100 Integrated LAN, Graphics Output

USB 2.0 Support
SATA Interface
Expandability
Table 4 describes the LED states when the board is powered up and the LAN
subsystem is operating.
Table 4. LAN Status LEDs
The Desktop Board supports up to eight USB 2.0 ports (four ports routed to the back
panel and four ports routed to two front panel USB 2.0 headers). The USB 2.0 ports
are compatible with USB 1.1 devices. USB 1.1 devices will function normally at
USB 1.1 speeds.
USB 2.0 support requires both an operating system and drivers that fully support
USB 2.0 transfer rates. Disabling High-Speed USB in the BIOS reverts all USB 2.0
ports to USB 1.1 operation. This may be required to accommodate operating systems
that do not support USB 2.0.
NOTE
Computer systems that have an unshielded cable attached to a USB port might not
meet FCC Class B requirements, even if no device or a low-speed USB device is
attached to the cable. Use a shielded cable that meets the requirements for a
full-speed USB device.
The Desktop Board supports two SATA channels (3.0 Gb/s) that support one device
per channel. The SATA controller supports IDE and ACHI configuration and can
operate in both legacy and native modes.
For system expansion, the Desktop Board provides one PCI connector that can support
either a single PCI add-in card or a single- or dual-slot PCI riser card.
LED
Activity (A)
Speed (B)
LED Color
Green
N/A
Yellow
LED State
Blinking
Off
On
Indicates
LAN activity is occurring.
10 Mbits/s data rate is selected.
100 Mbits/s data rate is selected.
17