CRT1-ATT01 Omron, CRT1-ATT01 Datasheet - Page 86

• Manufacturer Part Number: CRT1-ATT01
• Description: Bracket 16 Pt Slave MIL
• Manufacturer: Omron

Specifications of CRT1-ATT01

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

■ Pressure-welding a Flat Cable to a MIL Socket
To make your own connecting cable by pressure-welding the flat cable to the MIL socket, use the components shown in the table below
and follow the directions.
86
• Connecting to a Connector-Terminal Block Conversion Unit
Slim
Through-type
With common terminal
Three-tier with common terminal
Screw-less clamp terminals
e-CON connector
• Connecting Loose Wires to Devices
CRT1-V@D16ML/
XWT-V@D16ML
CRT1-V@D32ML
CRT1-VDA02ML/
CRT1-VAD02MLD/
CRT1-VDA02MLD
CRT1-VAD04ML
• Required Components
10 pins
16 pins
20 pins
40 pins
The following Connector-Terminal Block Conversion Units are available.
For details, refer to the SYSMAC Selection Guide (Cat. No. X066).
The following table shows the Cables available when the Slave Unit has a MIL connector and the other device has loose wires. Use
these Cables as needed.
Number of connector pins
Slave model
Appendix
Type
20 pins
40 pins
10 pins
16 pins
No polarity guide
Uses polarity guide
XG4M-1630-T
XG4M-2030-T
XG4M-4030-T
G79-A200C (2 m)
G79-A500C (5 m)
G79-Y100C (1 m)
G79-Y150C (1.5 m)
G79-Y200C (2 m)
G79-Y300C (3 m)
G79-Y500C (5 m)
G79-A200C-D1 (2 m)
G79-A500C-D1 (5 m)
G79-Y100C-D1 (1 m)
G79-Y200C-D1 (2 m)
G79-Y500C-D1 (5 m)
MIL Cable model
XW2D
XW2B
XW2C
XW2E
XW2F
XW2N
Series
Model
XG4M-1031-T
XG4M-1030-T
Loose wire size: AWG24
Loose wires are cut.
Forked terminals are attached to the loose wires.
Forked terminal: 161071-M2
(Nippon Terminal)
Loose wire size: AWG28
Loose wires are cut.
Forked terminals are attached to the loose wires.
Forked terminal: 161071-M2
(Nippon Terminal)
Indicated cable is not available
Remarks