CRT1-ATT01 Omron, CRT1-ATT01 Datasheet - Page 66

• Manufacturer Part Number: CRT1-ATT01
• Description: Bracket 16 Pt Slave MIL
• Manufacturer: Omron

Specifications of CRT1-ATT01

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Specifications of the CompoNet Communications Unit
Dimensions
GRT1-CRT
66
I/O points
Maximum number of
SmartSlice I/O Units
Status area
Parameter backup and
restore
Baud rate
Communications media
Indicators
Switches
Connectors
Terminals
Power consumption
Power consumption for
each SmartSlice I/O
Terminal block
SmartSlice I/O Terminal
blocks
Current consumption for I/
O power supply
Weight
Accessories
Item
SmartSlice CompoNet Communications Unit
23.1
25.1
Inputs: 32 bytes maximum (including status and areas which the Unit does not use)
Output: 32 bytes maximum (including areas which the Unit does not use)
64 (Do not count the End Unit.)
1 word (This word shows the status of the CompoNet Communications Unit.)
You can back up or restore a maximum of 2 KB of data for one CompoNet Communications Unit.
The CompoNet Communications Unit uses the baud rate of the CompoNet Master Unit (93. 75 kbps, 1.5 Mbps, 3 Mbps, or 4 Mbps).
You can use these cables:
Note: The Round Cable I, Round Cable II, Flat Cable I, and Flat Cable II are different types of cable. You must use a Repeater to divide
MS (green/red): This indicator shows the status of the CompoNet Communications Unit.
NS (green/red): This indicator shows the communications status of the CompoNet network.
TS (green/red): This indicator shows the status of the SmartSlice I/O Terminal.
UNIT PWR (green): This indicator shows the status of the Unit power supply.
I/O PWR (green): This indicator shows the status of the I/O power supply.
Rotary switches: There are two rotary switches. You use them to set the node address.
DIP switch: There is one DIP switch with four pins. You use them to set the operating mode.
There is one CompoNet communications connector.
Clamp terminals for Unit power supply (24 VDC)
Clamp terminals for I/O power supply (24 VDC)
2.5 W
80 W max.
(You must divide the I/O Terminal into blocks to use more than 80 W.)
Main block and a maximum of two expansion blocks
4 A max.
125 g
None
Round Cable I (JIS C 3306, VCTF 2-core 0.75-mm
Round Cable II (JIS C 3306, VCTF 4-core 0.75-mm
Flat Cable I (without sheath, DCA4-4F10)
Flat Cable II (with sheath, DCA5-4F10)
61.2
a branch line from the main line to use more than one type of cable.
69.7
GRT1-CRT
2
2
twisted-pair cable)
twisted-pair cable)
Specification
58
84
3
3
(Unit: mm)