TOOTHPIC RF Solutions, TOOTHPIC Datasheet - Page 50

• Manufacturer Part Number: TOOTHPIC
• Description: MODULE, BLUETOOTH, DATA ACQUISITION
• Manufacturer: RF Solutions

Specifications of TOOTHPIC

• Svhc: No SVHC (15-Dec-2010)

Page 50
10. Type the following into HyperTerminal and press enter. (You can use lower case for the ‘B’ if you
11. What you typed was the instruction to set pin AN11 as an output. The 04 indicates that there are four
12. Type the following into HyperTerminal and press enter:
13. Next we are going to ‘drive’ the BlueMatik Bluetooth radio from the host device. Type the following
14. Finally, you are going to provide a FlexiPanel User Interface service.
want. Ensure Send line ends with line feeds is set in HyperTerminal so that <CR><LF> is sent when
you press enter.)
Note: When sending ASCII commands to ToothPIC, if you make a typing error, avoid pressing delete,
or pressing enter repeatedly until an error message is generated. This is because the delete and
carriage return characters are legitimate binary characters. Instead, keep tapping a completely illegal
character (e.g. ‘z’) until the error message 0302F1 is generated. Then you can start typing a new
command.
bytes in the command. The 02 indicates that you want to configure an I/O pin. The 1B indicates that
the pin is AN11. Finally the 01 indicates that you want it to be a digital output. You should get the
response:
The 0201 response is an acknowledgement that the command was carried out successfully. This
response will always be sent if no other response is appropriate. All commands generate at least one
response. 0201 responses are common, so this tutorial will not refer to them again. If you received
the message 0302F1, that was an error message and you probably made a typing mistake – power
up again and restart.
What you typed was the instruction to set pin AN11 high – the LED should have come on. The 03
indicates that you want to set the value of an I/O pin. The 01 indicates that you want it to be high.
into HyperTerminal and press enter:
What you typed was the instruction to scan for devices for 15 seconds. The 05 indicates that you
want to send a command to the BlueMatik radio. The second 04 indicates that you want to send the
Inquiry command. The 0F indicates that the inquiry should last 15 seconds. Depending on the other
discoverable Bluetooth devices in range you may receive up to 10 responses such as:
The 160505 indicates that the response is a discovered device.
Bluetooth ID of the discovered device. The 466C65786950616E656C205600 is a zero-terminated
string containing the first 12 characters of the device name (“FlexiPanel V” in this case).
HyperTerminal and press enter:
This starts the FlexiPanel User Interface server. Using a FlexiPanel Client application, connect to
ToothPIC Slave.
9-Apr-06
04021B01
0201
04031B01
0405040F
160505080046B939B0466C65786950616E656C205600
030601
Toothpick 3.0.00007
DS380-8
© FlexiPanel Ltd
Patents apply and/or pending
The 080046B939B0 is the
Type the following into
www.FlexiPanel.com