210-525NR1 RF Solutions, 210-525NR1 Datasheet - Page 4

• Manufacturer Part Number: 210-525NR1
• Description: RECEIVER, DIN RAIL, 16CH
• Manufacturer: RF Solutions

Specifications of 210-525NR1

• Svhc: No SVHC (15-Dec-2010)

DS200-11 March ’06
1 Configuring a Remote Telemetry System
There are three Steps:
1. Pre-Configure the 200 or 201 series transmitter
2. Pre- Configure the 210Rx to operate with a 200 or 201 series transmitter
3. Marry a 200/201Tx to a 210Rx
1.1
1. Mapping the 200/201 Transmitter Inputs to the 210 Receiver Outputs
2. Enable Option Links (ENABLE 1-8)
3. Auto Transmit with Watchdog Mode ‘Auto Tx’
The Remote telemetry system automatically maps the 8 transmitter input channels to 8 receiver output
channels. The ‘8/15’ option link on the transmitter allows selection of channels 1-8 or 9-15 on the receiver.
The 200 and 201 Transmitters have eight ‘Enable’ Option links which must be fitted in order for the
corresponding input to be valid (otherwise the 210Tx will ignore it). This enables applications where many
transmitters are used with a single 210Rx (many to one relationship)
When the ‘Auto Tx’ link is made, the 200/201 Tx automatically transmits its data once within every 5
second period, in addition, channel 16 is allocated as a ‘system watchdog‘. As long as the 210Rx
continues to receive this signal then output ‘16’ is held ON. If for any reason (fault or RF interference) the
signal is not received for approx 20secs then output ‘16’ will drop out.
(200Tx/201Tx -> 210Rx)
200/201 Tx Option Link
Pre-Configure a 200/201 Transmitter Encoder
Modular Radio Telemetry System
Connected
Open
©2005 RF Solutions Ltd, www.rfsolutions.co.uk
Tel [phone] Fax [phone]
210 Rx output Channels
9 – 15
1 – 8
Page 4
200 Series