CNY17F-3X001 Vishay, CNY17F-3X001 Datasheet - Page 11

• Manufacturer Part Number: CNY17F-3X001
• Description: Optocoupler
• Manufacturer: Vishay

Specifications of CNY17F-3X001

• Leaded Process Compatible: Yes
• Forward Current: 60 mA
• Maximum Input Diode Current: 60 mA
• Maximum Reverse Diode Voltage: 6 V
• Output Device: Transistor
• Output Type: DC
• Configuration: 1
• Input Type: DC
• Maximum Collector Emitter Voltage: 70 V
• Maximum Collector Emitter Saturation Voltage: 400 mV
• Isolation Voltage: 5300 Vrms
• Current Transfer Ratio: 200 %
• Maximum Forward Diode Voltage: 1.65 V
• Maximum Collector Current: 100 mA
• Maximum Power Dissipation: 150 mW
• Maximum Operating Temperature: + 100 C
• Minimum Operating Temperature: - 55 C
• Package / Case: PDIP-6
• No. Of Channels: 1
• Optocoupler Output Type: Phototransistor
• Input Current: 60mA
• Output Voltage: 70V
• Opto Case Style: DIP
• No. Of Pins: 6
• Approval Bodies: UL, IEC65, IEC950, BS6301,
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Optocoupler lead-bend configurations are available as
options. In addition, partial discharge testing as per VDE/IEC
is also available as an option.
See the order information section in the data sheet to
determine if and which options are available to a specific
product. Contact the Vishay sales office for other option
configurations. The options are:
Option 1
Option 6
Option 7
This field is always 4 characters long and commences with
the character X. In the case of surface mounted products in
Tape and Reel format, the tape and reel option character “T”
will follow this field. The possible combinations for these
Fields
X001, X006, X007, X008, X009, X001T
X009T, X016, X017, X018, X019, X017T, X018T, X019T
Notes
(1)
(2)
Document Number: 83713
Rev. 1.7, 11-Sep-07
Not all options are available for all product types.
The X001T option is only available on products that are available
on the following SMD products SFH6106, SFH6156, SFH6186,
SFH6206 and SFH6286 series, e.g. SFH6106-3X001T .
(1)
are:
standoff
VDE option
400 mil (10.16 mm) lead spread DIP configuration
Surface mount, gull wing DIP configuration with
Examples:
CNY17F-2X017T
4N35-X016
SFH615-3X001
VO615A-9X007T
S
Prefix
BRT
Il
ILD
ILQ
SFH6
VO
F
H
For technical questions, contact: [e-mail]
6
Base Part Number
Note
(
1)
2
, X007T, X008T,
Used on selected products, consult data sheet for details
1
Option Information
5
A
CTR Ranges
1 = 40 % to 80 %
2 = 63 % to 125 %
3 = 100 % to 200 %
4 = 160 % to 320 %
5 =
6 = 100 % to 300 % (
7 = 80 % to 160 % (
8 = 130 % to 260 % (
9 = 200 % to 400 % (
or 50 % to 150 % (
-
250 % to 500 %
Option 8
Option 9
ORDERING OPTIONS
A specific option or combination of options can be ordered by
add the options definition field following the base part
number and CTR range (if applicable) as presented in the
following example:
OPTION 1
OPTOCOUPLERS FOR SAFE ELECTRICAL
INSULATION
(VDE 0884)/DIN EN 60747-5-5 PENDING
The optocoupler listed are suitable for safe electrical
insulation only within the safety maximum ratings.
Compliance with the safety maximum ratings must be
ensured by protective circuits.
The partial discharge measurement ensures that no partial
discharge occurs during operation at maximum permissible
operating insulation voltage (V
discharge affects the insulating materials and can result in a
high voltage breakdown.
It is recommended that tests with the insulation test voltage
(V
occur impairing the insulation characteristics. Thus partial
discharges also may occur at the maximum permissible
operating insulation voltage.
The insulation test per DIN EN 60747-5-2 (VDE 0884)/
DIN EN 60747-5-5 pending is carried out after all the other
tests
ISOL
3
) should not be made, otherwise partial discharge may
1)
1)
increased clearance
Surface mount, gull wing DIP configuration with
Surface mount, gull wing DIP configuration
1)
1)
1)
X
Option 1 may be combined with the other
Option T may only be combined with
Options Definition
Option 1 Optocouplers for saf e electr ical
Option 6 Optocouplers with 10.16 mm (0.4")
Option 7 Optocouplers with SMD lead form bend,
Option 8 Optocouplers with 10.16 mm (0.4") SMD
Option 9 Optocouplers with SMD lead form bend,
0
lead forming options.
Options 7, 8, and 9
Insulation per DIN VDE 0884
through hole lead spread
0.9 mm maximum standoff height
lead form bend
0.25 mm maximum standoff height
PER
Vishay Semiconductors
Option Information
0
DIN
IORM
9
Tape and
Reel Option
). Permanent partial
EN
T
18482
www.vishay.com
60747-5-2
(1)
1