AFCT-5942TGZ Avago Technologies US Inc., AFCT-5942TGZ Datasheet - Page 11

• Manufacturer Part Number: AFCT-5942TGZ
• Description: OC48 IR SFF, RoHS 0/70
• Manufacturer: Avago Technologies US Inc.
• Series: METRAKr

Specifications of AFCT-5942TGZ

• Data Rate: 2488Mbps
• Wavelength: 1300nm
• Applications: General Purpose
• Voltage - Supply: 3.1 V ~ 3.5 V
• Connector Type: LC Duplex
• Mounting Type: Through Hole
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Regulatory Compliance
The Regulatory Compliance for transceiver performance
is shown in Table 1. The overall equipment design will
determine the certification level. The transceiver perfor-
mance is offered as a figure of merit to assist the designer
in considering their use in equipment designs.
Electrostatic Discharge (ESD)
The device has been tested to comply with MIL-STD-
883E (Method 3015). It is important to use normal ESD
handling precautions for ESD sensitive devices. These
precautions include using grounded wrist straps, work
benches, and floor mats in ESD controlled areas.
Electromagnetic Interference (EMI)
Most equipment designs utilizing these high-speed
transceivers from Avago Technologies will be required
to meet FCC regulations in the United States, CENELEC
EN55022 (CISPR 22) in Europe and VCCI in Japan. Refer to
EMI section (page 9) for more details.
Regulatory Compliance - Targeted Specification
11
Feature
Electrostatic Discharge
(ESD) to the Electrical Pin
Electrostatic Discharge
(ESD) to the LC
Receptacle
Electromagnetic
Interference (EMI)
Immunity
Laser Eye Safety and
Equipment Type Testing
Component
Recognition
RoHS Compliance
Test Method
MIL-STD-883E
Method 3015
Variation of IEC 61000-4-2
FCC Class B
CENELEC EN55022 Class B
(CISPR 22A)
VCCI Class I
Variation of IEC 61000-4-3
US 21 CFR, Subchapter J
per Paragraphs 1002.10
and 1002.12
EN 60825-1: 1994 +A11
EN 60825-2: 1994
EN 60950: 1992+A1+A2+A3
Underwriters Laboratories and Canadian
Standards Association Joint Component
Recognition for Information Technology
Equipment Including Electrical Business
Equipment.
Immunity
Transceivers will be subject to radio-frequency electro-
magnetic fields following the IEC 61000-4-3 test method.
Eye Safety
These laser-based transceivers are classified as AEL Class
I (U.S. 21 CFR(J) and AEL Class 1 per EN 60825-1 (+A11).
They are eye safe when used within the data sheet limits
per CDRH. They are also eye safe under normal operating
conditions and under all reasonably foreseeable single
fault conditions per EN60825-1. Avago Technologies
has tested the transceiver design for compliance with
the requirements listed below under normal operating
conditions and under single fault conditions where ap-
plicable. TUV Rheinland has granted certification to these
transceivers for laser eye safety and use in EN 60950 and
EN 60825-2 applications. Their performance enables the
transceivers to be used without concern for eye safety up
to 3.6 V transmitter V
Performance
Class 2 (2 kV).
Tested to 8 kV contact discharge.
Margins are dependent on customer board and
chassis designs.
Typically show no measurable effect from a
10 V/m field swept from 27 to 1000 MHz applied to
the transceiver without a chassis enclosure.
AEL Class I, FDA/CDRH
CDRH Accession Number: 9521220-140
AEL Class 1, TUV Rheinland of North America
TUV Bauart License: 933/21203530/290
UL File Number: E173874
Reference to EU RoHS Directive 2002/95/EC
CC
.