AFCT-5745TPZ Avago Technologies US Inc., AFCT-5745TPZ Datasheet - Page 14

• Manufacturer Part Number: AFCT-5745TPZ
• Description: Fiber Optic Transceiver,MODULE
• Manufacturer: Avago Technologies US Inc.
• Series: METRAKr

Specifications of AFCT-5745TPZ

• Data Rate: 2.7Gbps
• Wavelength: 1300nm
• Applications: General Purpose
• Voltage - Supply: 3.1 V ~ 3.5 V
• Connector Type: LC Duplex
• Mounting Type: SFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Regulatory Compliance
Electrostatic Discharge
There are two conditions in which immunity to ESD dam-
age is important. The first condition is during handling
of the transceiver prior to insertion into the transceiver
port. To protect the transceiver, it is important to use
normal ESD handling precautions. The ESD sensitivity
of the AFCT-5745Z is compatible with typical industry
production environments. The second condition is static
discharges to the exterior of the host equipment chassis
after installation. To the extent that the duplex LC optical
interface is exposed to the outside of the host equipment
chassis, it may be subject to system-level ESD require-
ments. The ESD performance of the AFCT-5745Z exceeds
typical industry standards.
Immunity
Equipment hosting the AFCT-5745Z modules will be sub-
jected to radio-frequency electro-magnetic fields in some
environments. These transceivers have good immunity
to such fields due to their shielded design.
Regulatory Compliance
14
Feature
Electrostatic Discharge (ESD)
to the Electrical Pins
Electrostatic Discharge (ESD)
to the Duplex LC Receptacle
Electromagnetic Interference
(EMI)
Immunity
Eye Safety
Component Recognition
RoHS Compliance
Test Method
MIL-STD-883C
Method 3015.4
Variation of IEC 61000-4-2 - Direct
ESD (ie. front panel connector
receptacle).
Variation of IEC 61000-4-2 - In-
direct ESD (contact discharge to
coupling plane)
FCC Class BCENELEC EN55022
Class B (CISPR 22A)VCCI Class 1
Variation of IEC 61000-4-3
US FDA CDRH AEL Class 1EN (IEC)
60825-1, 2,EN60950 Class 1
Underwriter’s Laboratories and
Canadian Standards Association
Joint Component Recognition for
Information Technology Equip-
ment Including Electrical Business
Equipment
Eye Safety
These 1300 nm FP and DFB based transceivers provide
Class 1 eye safety by design. Avago has tested the trans-
ceiver design for compliance with the requirements listed
in Table 2 under normal operating conditions and under
a single fault condition.
Flammability
The AFCT-5745Z transceiver housing is made of metal
and meets UL E173874 standard for flame retardancy.
Electromagnetic Interference (EMI)
Most equipment designs utilizing these high-speed trans-
ceivers from Avago will be required to meet the require-
ments of FCC in the United States, CENELEC EN55022
(CISPR 22) in Europe and VCCI in Japan.
The metal housing and shielded design of the AFCT-
5745Z minimize the EMI challenge facing the host equip-
ment designer. These transceivers provide superior EMI
performance. This greatly assists the designer in the
management of the overall system EMI performance.
Performance
Class 2 (2000 Volts)
15 kV (air discharge) and 8 kV (contact). Transceiver shall
perform properly during test.
15 kV (contact discharge applied to coupling plane). Trans-
ceiver shall perform properly during test with no data loss.
Typically show no measurable effect from a 10 V/m field
swept from 80 to 1000 MHz applied to the transceiver with-
out a chassis enclosure.
CDRH certification # 9521220-139TUV file #
933/21205741/11
UL file # E173874
Reference to EU RoHS Directive 2002/95/EC