TC65 TERMINAL SIEMENS, TC65 TERMINAL Datasheet - Page 55

• Manufacturer Part Number: TC65 TERMINAL
• Description: GSM/GPRS JAVA TERMINAL PACK
• Manufacturer: SIEMENS

Specifications of TC65 TERMINAL

• Rohs Compliant: YES

6.2
As an integrated product, the TC65 Terminal is fully compliant with the grant of FCC Equipment
Authorization issued for the in-built TC65 Module, and therefore, bears the label “Contains FCC ID
QIPTC65”.
The FCC Equipment Authorization Certification for the TC65 Module is listed under the
The Siemens reference application of the TC65 Module registered under the above identifier is
certified to be in accordance with the following Rules and Regulations of the Federal
Communications Commission (FCC).
Please note that changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
6.3
The TC65 Terminal has to be tested and approved for use with a maximum cable length of 3m for
following interfaces:
- USB interface (shielded)
- Serial interface (RS232)
- ADC inputs
- GPIOs
The length of following lines may exceed 3m:
- DC power supply lines
- Audio interface
- Antenna interface
It is recommended to keep the digital lines for I²C-, SPI- lines as short as possible. The maximum
cable length is 150mm.
TC65 Terminal_HD_V01.041
TC65 Terminal Hardware Interface Description
Strictly Confidential / Released
FCC identifier QIPTC65
IC: 267W-TC65
granted to Siemens AG.
Power listed is ERP for Part 22 and EIRP for Part 24
“This device contains GSM and GPRS Class12 functions in the 900 and 1800MHz Band
which are not operational in U.S. Territories.
This device is to be used only for mobile and fixed applications. The antenna(s) used for this
transmitter must be installed to provide a separation distance of at least 20cm from all persons
and must not be co-located or operating in conjunction with any other antenna or transmitter.
Users and installers must be provided with antenna installation instructions and transmitter
operating conditions for satisfying RF exposure compliance. Antennas used for this OEM
module must not exceed 8.4dBi gain (GSM 1900) and 2.9dBi (GSM 850) for mobile and fixed
operating configurations. This device is approved as a module to be installed in other
devices.”
Compliance with FCC Rules and Regulations
Cable Requirements
Page 55 of 58
s
29.09.2005