TC65 TERMINAL SIEMENS, TC65 TERMINAL Datasheet - Page 29

• Manufacturer Part Number: TC65 TERMINAL
• Description: GSM/GPRS JAVA TERMINAL PACK
• Manufacturer: SIEMENS

Specifications of TC65 TERMINAL

• Rohs Compliant: YES

3.8
In order to send or receive data connect an external RF antenna to the SMA connector which is
internally connected to the RF signal of the GSM module.
Please consider that the recommended antenna equipment has been chosen to achieve optimum RF
performance when operating the TC65 Terminal. Siemens does not accept warranty claims for
damage caused by inappropriate equipment connected to the antenna connector.
3.9
The SIM interface is intended for 3V and 1.8V SIM cards. The card
holder is a five wire interface according to GSM 11.11. A sixth pin
has been added to detect whether or not the SIM card drawer is
inserted.
Removing and inserting the SIM card during operation requires the
software to be reinitialized. Therefore, after reinserting the SIM card
it is necessary to restart TC65 Terminal.
Note: No guarantee can be given nor any liability accepted, if loss of
data is encountered after removing the SIM card during operation.
Also, no guarantee can be given for properly initializing any SIM
card that the user inserts after having removed a SIM card during
operation. In this case the TC65 Terminal must be restarted by the application.
Table 5: Pin assignment – SIM card holder
TC65 Terminal_HD_V01.041
TC65 Terminal Hardware Interface Description
Strictly Confidential / Released
Pin number on
holder
4,8
1
2
3
5
6
7
Antenna Interface
SIM Interface
VSIM
CCRST
CCCLK
GND
CCVPP
CCIO
CCIN
Signal name
Figure 9: Pin location of the Molex SIM card holder and position
I/O
I/O
O
O
O
-
-
I
Supply voltage for SIM card is generated by the module.
Chip card reset, prompted by the module
Chip card clock
Ground
Not connected
Serial data line, bi-directional
Chip card drawer detection
0 = Chip card drawer inserted
1 = Chip card drawer not inserted
Input on the baseband processor for detecting the chip
card drawer in the holder; if the SIM is removed during
operation the interface is shut down immediately to prevent
destruction of the SIM.
Page 29 of 58
Function
s
29.09.2005