PAXCDC2C Red Lion Controls, PAXCDC2C Datasheet - Page 22

• Manufacturer Part Number: PAXCDC2C
• Description: Extnd. RS232 Card W/9 Pin D Connector
• Manufacturer: Red Lion Controls

Specifications of PAXCDC2C

• Brand/series: PAXDR
• Card Type: Option Communications
• Communication: Serial RS232
• Data Protocols: 7/8 bits, 300 to 19,200 baud, no, even or odd parity
• Pax Label Kit: 189 Different Engineering Units, Labels Inserted Inside the Unit
• Lead Free Status / Rohs Status: RoHS Compliant part


each time the setpoint value is reached. The automatic reset can occur at output
start (
appear if the Totalizer Setpoint Action is Timed Out. This reset may be different
from the Totalizer Reset Action selected in Module 4.
SELECTION

Assignment (
assigned totalizer is reset by a setpoint generated Totalizer Auto reset.






This parameter automatically resets the Setpoint Assigned Totalizer (A or B)
Select



) or output end (
LOW ACTING WITH NO DELAY
LOW ACTING WITH DELAY
SETPOINT RESET WITH DISPLAY RESET
ACTION
No Auto Reset
Reset to Zero at the Start of output activation.
Reset to Count Load Value at the Start of output activation
Reset to Zero at the End of output activation (timed out only)
Reset to Count Load at the End of output activation (timed out only)

, so the setpoint output will deactivate (reset) when the Setpoint




) totalizer display resets. Note: The output will not reset if the
TOTALIZER AUTO RESET


). The reset at output end selections will only




SETPOINT (ALARM) FIGURES FOR RATE


(For Reverse Action, The Alarm state is opposite.)
HIGH ACTING WITH NO DELAY
HIGH ACTING WITH DELAY
22

activates. (Example: SP1 deactivates when SP2 activates and SP4 when SP1
activates.) The last setpoint will wrap around to the first.


activates and then times out (deactivates). This function may only be used if the
SPn+1 is programmed for Setpoint Action of
when SP2 is activated and then times out.) The last setpoint will wrap around
to the first.

Select
Select
SETPOINT RESET WHEN SPn+1 DEACTIVATES


SETPOINT RESET WHEN SPn+1 ACTIVATES
, so the setpoint output will deactivate (reset) when SPn +1
, so the setpoint output will deactivate (reset) when SPn +1






LOW ACTING WITH TIMEOUT
HIGH ACTING WITH TIMEOUT



. (Example SP1 deactivates