CS1W-CN118 Omron, CS1W-CN118 Datasheet - Page 7

• Manufacturer Part Number: CS1W-CN118
• Description: Connector Cable
• Manufacturer: Omron

Specifications of CS1W-CN118

• Jacket Color: Black
• Connector Type B: CS/CJ Series Peripheral
• Connector Type A: D-sub 9-pin Female
• Cable Length: 0.1m
• Cable Assembly Type: USB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PRECAUTIONS
6
Caution
█
Application Precautions
Perform wiring so that the power supply wires are not exposed and do not come into
contact with any metal parts. Contact with metal parts may cause a fire.
Observe the following precautions when using the USB-Serial Conversion Cable.
•These cables are designed specifically to connect a personal computer to an OMRON
•Do not attempt to disassemble, repair, or modify any Units.
•Touch a grounded metal object to discharge any static electricity before connecting the
•To avoid malfunctions due to noise, do not route the Conversion Cable parallel or close
•Tighten the D-sub connector screws to a torque of 0.4 N⋅m.
•Either turn OFF the power supply to the computer or disconnect the cable from the
•Always lock any connectors that are equipped with locking mechanisms.
•Do not place anything on the cable.
•Do not bend the cable past it's normal bending radius or pull on the cable.
•Touch the Unit only after touching a grounded metal object to release static electricity
•Disconnect or connect the cable only after confirming that communications are not in
•Do not quickly and repeatedly connect and disconnect the USB connector. Doing so
•It may take some time for the computer to detect the cable after the cable is connected.
•Do not connect the RS-232C connector on the CS1W-CIF31 Cable (D-sub type)
•Do not connect this cable to a USB hub; connect it directly to a USB connector on the
•Do not extend the USB portion of this cable with an extension cable. The cable may
•Set the communications port (COM port) number used by the software to the
PLC or PT. Do not use them to connect any other devices and do not use a
commercially available USB-serial conversion cable in place of these cables. Improper
usage of these cables may result in damage to external devices, the PLC, or the PT.
Conversion Cable to the PLC's connector, a PLC Connecting Cable, or the personal
computer's USB port.
to a high-tension power line.
USB connector before setting the DIP switch.
from your body.
progress.
may cause the computer to malfunction.
This is not a malfunction.
directly to the RS-232C or RS-422/485 connector on the PLC. The cable may
malfunction.
computer.
The cable may malfunction.
malfunction.
communications port (COM port) number allocated to the Conversion Cable.