CS1W-CN118 Omron, CS1W-CN118 Datasheet - Page 5

• Manufacturer Part Number: CS1W-CN118
• Description: Connector Cable
• Manufacturer: Omron

Specifications of CS1W-CN118

• Jacket Color: Black
• Connector Type B: CS/CJ Series Peripheral
• Connector Type A: D-sub 9-pin Female
• Cable Length: 0.1m
• Cable Assembly Type: USB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

About this Manual
About this Manual
4
WARNING
Failure to read and understand the information provided in this manual may result in
personal injury or death, damage to the product, or product failure. Please read each
section in its entirety and be sure you understand the information provided in the section
and related sections before attempting any of the procedures or operations given.
Thank you for purchasing the CS1W-CIF31 USB-Serial Conversion Cable.
The CS1W-CIF31 USB-Serial Conversion Cable connects an OMRON PLC (or PT) to a
personal computer's USB port.
Please read this manual carefully and be sure you understand the information provided
before attempting to install or operate the USB-Serial Conversion Cables. Be sure to
read the precautions provided in the following section.
Precautions provides general precautions for using the USB-Serial Conversion Cables
and related devices.
Overview and Components describes the parts of the USB-Serial Conversion Cables
and gives an overview of their application.
Packing Lists shows the various items that come with the USB-Serial Conversion
Cables.
Specifications provides the hardware and software specifications.
Dimensions shows external cable dimensions.
System Configuration shows the application of the USB-Serial Conversion Cables
with various models of PLC.
USB to PLC/PT Connection Tables lists the possible combinations of Cables, Units,
and ports that can be used.
Application Procedure gives an overview of the steps required to use USB-Serial
Conversion Cables.
DIP Switch Settings and Cable Connections describes switch settings and cable
connections.
Installing the Drivers tells how to install the software drivers.
Uninstalling the Drivers tells how to uninstall the software drivers.
Connecting Online from the CX-Programmer tells how to connect to a PLC or PT
from a computer running the CX-Programmer.