EVT307-5DZ-01F-Q SMC Corporation of America, EVT307-5DZ-01F-Q Datasheet - Page 10

• Manufacturer Part Number: EVT307-5DZ-01F-Q
• Description: VALVE, 1/8 PORT, 24VDC
• Manufacturer: SMC Corporation of America

Specifications of EVT307-5DZ-01F-Q

• Supply Voltage Max: 24VDC
• Operating Pressure Psi Max: 0.9MPa
• Operating Pressure Min: 0MPa
• Operating Temperature Range: 0°C To +50°C
• Svhc: Bis (2-ethyl(hexyl)phthalate) (DEHP) (15-Dec-2010)
• Connection: RoHS Compliant
• Connection Size: 0.125"
• Operating Pressure Max: 0.9MPa
• Rohs Compliant: NA
• Valve Type: Poppet

VT317
Construction
1) Series VT317 can change electrical entry
angle. (4 positions)
2) How to change:
Loosen the nut q, remove the coil w from
the body assembly e, place the positioning
pin r at the required place, put back the coil
w to its place, and tighten sufficiently with
lock nut q.
2.5-10
No.
Change of Electrical Entry Angle
Operation principles
<De-energized>
Spool valve w is pushed upward by the return
spring e, port [P] is closed, and port [A] and port
[R] are opened.
Component Parts
q
w
Caution
Description
Spool valve
Body
De-energized
Aluminum die cast
Aluminum, NBR
Materrial
Color: Platinum silver
Notes
<Energized>
When an electric current is applied to the molded
coil r, the armature t is attracted to the pole y,
and through the push rod u, it pushes down the
spool valve w. Then port [P] and port [A] are con-
nected. At this time, there will be gaps between
the armature t and the pole y, but the armature
will be magnetically attracted to the pole y.
2) DC
DIN connector/Conduit terminal
• With surge voltage suppressor (S)
• With indicator light and surge suppressor (Z)
48V DC or less
Indicator light and surge voltage supressor
Energized
100V DC
DIN connector is connected inside as in the
figure below. Connect to the corresponding
power supply.
Note)For those with an external measur–
Wiring
Applicable cable O.D.
Applicable crimping terminal
The maximum size for the round termi–
nal is 1.25mm -3.5 and for the Y termi–
ø6 to ø12
ement of ø9 to ø12, remove the inner
portion of the ground gasket before
using.
nal is 1.25mm -4.
2
2