8106 3M, 8106 Datasheet - Page 21

• Manufacturer Part Number: 8106
• Description: CONN F/OPTIC EPOXY ST SM 126UM
• Manufacturer: 3M

Specifications of 8106

• Connector Style: ST
• Simplex/duplex: Simplex
• Mode: Singlemode
• Mounting Type: Free Hanging (In-Line)
• Fastening Type: Bayonet Lock
• Ferrule Material: Zirconia, Ceramic
• Color: Silver
• Connector Type: ST Fiber-Optic
• Fiber Type: Singlemode
• Fiber Diameter: 126um
• Connector Body Material: Metal
• Body Material: Zirconia Ceramic
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Features: -
• Connector Type: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 5400717772; 54007177722; 80-6103-1827-3; 80610318273; MF8106

10.23 FC ConnectorÑInstall the
10.26 Install the shell by aligning the
11.0 Single-Mode Polishing Procedure
11.1 Perform an air polish on the
11.4 Wipe a layer of alcohol onto
fiber by gently moving the
connector in a circular motion
on the 2 micron lapping film
(pale aqua color).
the rubber pad.
boot on the connector.
chamfers in the shell with the
chamfers on the connector.
10.24 SC connectorÑAlign the
10.27 Push firmly on the shell until
11.2 Clean the polishing jig with a
11.5 Before the alcohol evaporates,
lint free cloth moistened with
isopropyl alcohol.
place the 2 micron lapping film
on the rubber pad shinny side
down. The alcohol creates a
suction on the lapping film and
helps hold it in place.
it snaps in place.
flats of the boot with the flat
sides of the connector body.
21
11.3 Clean the rubber pad with a
11.6 Clean the lapping film with a
Note: The 2 micron lapping film
10.25 Push the boot into place.
10.28 Install the dust cap on the
lint free cloth moistened with
isopropyl alcohol.
lint free cloth moistened with
isopropyl alcohol.
connector.
should be used for one
connector only.