8106 3M, 8106 Datasheet - Page 16

• Manufacturer Part Number: 8106
• Description: CONN F/OPTIC EPOXY ST SM 126UM
• Manufacturer: 3M

Specifications of 8106

• Connector Style: ST
• Simplex/duplex: Simplex
• Mode: Singlemode
• Mounting Type: Free Hanging (In-Line)
• Fastening Type: Bayonet Lock
• Ferrule Material: Zirconia, Ceramic
• Color: Silver
• Connector Type: ST Fiber-Optic
• Fiber Type: Singlemode
• Fiber Diameter: 126um
• Connector Body Material: Metal
• Body Material: Zirconia Ceramic
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Features: -
• Connector Type: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 5400717772; 54007177722; 80-6103-1827-3; 80610318273; MF8106

8.0 FCÑInstallation on Jacketed Cable
8.1 Turn on the Hot Melt oven. The
8.4 Load the connector into the FC
8.7 Score the jacket 1
8.10 To prevent the buffered fiber
oven requires 5 minutes to
warm up.
from the end.
connector holder. Align the key
on the connector with the key
way on the connector holder.
from being pulled out, lace
the cable through your fingers.
3
Ú
16
" (30 mm)
8.2 Open the package and remove
8.5 Place the connector holder and
Note: The connector should be in
8.8 Remove the jacket from the end
8.11 Remove the buffer in small
the components.
connector into the oven.
of the cable.
the buffer remains.
pieces until
the oven for at least one
minute, but no more than
ten minutes.
9
16
Ú
16
" (14 mm) of
8.3 Each package contains a
8.6 Place the strain relief boot and
8.9 Gather the aramid yarn together
8.12 Stripping template.
connector (A), strain relief boot
(B), clear strain relief tube (C)
and black crimp ring for 3 mm
cable (D). The strain relief tube
is not used on jacketed cable.
crimp ring on the cable.
and hold them against the cable
jacket.
A
(8 mm)
5/16"
(14-16 mm)
9/16"
B
(30 mm)
13/16"
9/16" Min.
(14 mm)
C
D