8106 3M, 8106 Datasheet - Page 13

• Manufacturer Part Number: 8106
• Description: CONN F/OPTIC EPOXY ST SM 126UM
• Manufacturer: 3M

Specifications of 8106

• Connector Style: ST
• Simplex/duplex: Simplex
• Mode: Singlemode
• Mounting Type: Free Hanging (In-Line)
• Fastening Type: Bayonet Lock
• Ferrule Material: Zirconia, Ceramic
• Color: Silver
• Connector Type: ST Fiber-Optic
• Fiber Type: Singlemode
• Fiber Diameter: 126um
• Connector Body Material: Metal
• Body Material: Zirconia Ceramic
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Features: -
• Connector Type: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 5400717772; 54007177722; 80-6103-1827-3; 80610318273; MF8106

6.13 Stripping template.
6.16 Remove the connector holder
CAUTION: VERY HOT.
6.19 Slide the crimp ring over the
6.22 Crimp the smaller part of the
from the oven.
aramid yarn until it is seated
against the connector.
crimp ring using the .137
cavity. (Use the .120 cavity
for the optional 2.4 mm crimp
ring.)
(8 mm)
5/16"
(14-16 mm)
9/16"
(30 mm)
13/16"
9/16" Min.
(14 mm)
6.17 Gently insert the fiber into the
6.14 Clean the fiber with a lint free
6.20 Verify that the bare fiber is
6.23 Place the connector holder into
cloth moistened with isopropyl
alcohol.
connector.
visible in the bottom of the
connector holder.
the cooling stand. The cooling
time is about 3 minutes.
13
6.18 Push the cable until it stops
6.15 Cut the aramid yarn to
6.21 Crimp the larger part of the
(8 mm) long.
against the connector. The
aramid yarn should flare out
over the backbone.
crimp ring with the .190 cavity
of the crimp tool.
5
Ú
16
"