STBVP6 BANNER ENGINEERING, STBVP6 Datasheet - Page 2

• Manufacturer Part Number: STBVP6
• Description: Photoelectric Touch Buttons
• Manufacturer: BANNER ENGINEERING

Specifications of STBVP6

• Output Current: 150mA
• Supply Voltage Range Dc: 10V To 30V
• Function: Proximity
• Primary Type: Photoelectric
• Technology: Photoelectric
• Accessories Available: Cordsets, Field Covers and Brackets
• Lead Free Status / Rohs Status: RoHS Exempt Product

In the United States, Banner’s STB Series Self-Checking Optical Touch Buttons are not by themselves safety devices! If they will
be used to initiate potentially dangerous machinery, certain industrial standards and regulations must be followed. Two-hand
control functions are regulated by the Occupational Safety and Health Administration (OSHA). Whether or not any particular STB
Touch Button installation meets all applicable OSHA requirements depends upon factors that are beyond the control of Banner En-
gineering Corp. These factors include the specific ways the button is applied, installed, wired, operated, and maintained.
Banner Engineering Corp. has attempted to provide complete application, installation, operation, and maintenance instructions. In
addition, we suggest that any questions regarding the use or installation of this Actuation Device be directed to the factory applica-
tions department at the telephone numbers or address shown on the back cover of this manual.
The user of this Actuation Device must ensure that all machine operators, maintenance personnel, electricians, and supervisors are
thoroughly familiar with and understand all instructions regarding the installation, maintenance, and use of this system, and with
the machinery upon which it is installed.
The user and any personnel involved with the installation and use of this Actuation Device must be thoroughly familiar with all
appropriate OSHA regulations and ANSI standards. Banner Engineering Corp. makes no claim regarding a specific recommendation of
any organization, the accuracy or effectiveness of any information provided, or the appropriateness of the provided information for a
specific application.
The user has the responsibility to ensure that all local, state, and national laws, rules, codes, and regulations relating to the use of this
Actuation Device are satisfied. We recommend that you carefully check that all legal requirements are met and that all installation and
maintenance instructions contained in this manual are followed.
U. S. Standards Applicable to Use of Two-Hand-Control Systems
European Standards Applicable to Use of Two-Hand-Control Systems
STB Series Self-Checking Optical Touch Buttons
page
ANSI B11
NFPA79
ANSI/RIA R15.06
EN292-1
EN292-2
EN60204-1
EN999
EN574
Available from:
!
Available from:
Available from:
Available from:
2
Important
Standards for Machine Tools “Safety Requirements for the Construction, Care and Use”
Safety Director
AMT – The Association for Manufacturing Technology
7901 Westpark Drive
McLean, VA 22102
Tel.: [phone]
“Electrical Standard for Industrial Machinery (1997)”
National Fire Protection Association
1 Batterymarch Park, P.O. Box 9101
Quincy, MA 02269-9101
Tel.: [phone]
“Safety Requirements for Industrial Robots and Robot Systems”
Robotic Industries Association
900 Victors Way, P.O. Box 3724
Ann Arbor, MI 48106
Tel.: [phone]
“Safety of Machinery – Basic Concepts, General Principals for Design, Part 1: Basic Terminology, Methodology”
“Safety of Machinery – Basic Concepts, General Principals for Design, Part 2: Technical Principals and Specifications”
“Electrical Equipment of Machines: Part 1: General Requirements”
Also, request a type “C” standard for your specific machinery.
“Safety of Machinery – The Positioning of Protective Equipment”
“Safety of Machinery – Two-Hand-Control Devices”
Global Engineering Documents
15 Inverness Way East
Englewood, CO 80112-5704
Tel.: [phone]
...
Fax: [phone]
read this page before proceeding!
Banner Engineering Corp.
www.bannerengineering.com • Tel: [phone]
•
Minneapolis, U.S.A.